现货 热销产品
HC-M-HS 200/40-MOD-ST-PE
HC-M-HS 200/40-MOD-ST-PE 1637184 PHOENIX CONTACT Contact insert module
$0.00
美元
库存 4949 件
主要规格
GTIN:
4046356095235
笔记:
Made to Order (non-returnable)
订单密钥:
1637184
产品目录页:
Page 551 (C-4-2015)
供应商信息
产品：0
通常在 2-3 个工作日内发货
质量保证
快速发货
技术支援
技术规格
| 参数 | 价值 |
|---|---|
| GTIN | 4046356095235 |
| 笔记 | Made to Order (non-returnable) |
| 订单密钥 | 1637184 |
| 产品目录页 | Page 551 (C-4-2015) |
| 包装单元 | 1 pc |
| 原产地 | DE (Germany) |
| 海关关税编号 | 85366990 |
| （环境条件） | 16 mm (70 mm²) |
| 最小订购量 | 100 pc |
| 联系材料（通用） | Copper alloy |
| 额定电流（尺寸） | 200 A |
| 宽度（关键商业数据） | 34.2 mm |
| 高度（关键商业数据） | 54.5 mm |
| 长度（关键商业数据） | 29.4 mm |
| 连接配置文件（尺寸） | PE |
| 接触载体材料（通用） | PC |
| 接触面材料（一般） | Ag |
| 系列（机械特性） | HC-M-HS |
| 单件重量（不含包装） | 98.500 g |
| 六角插座（环境条件） | WAF 5 |
| 拧紧扭矩（环境条件下） | 8 Nm (25 mm² ... 35 mm²) |
| 连接（机械特性） | Note on axial connection technology:Only for stranded wires. The specified conductor cross sections refer to the geometric cross section of the cable used.Use of cables with a geometric cross section that differs greatly from the nominal cross section of the cable should be checked before use.The wiring space for axial screw technology is designed for fine strand cables according to VDE 0295 Class 5. Deviating cable structures (e.g., Class 6 cables) should be checked before use.Assembly instructionsBefore assembly, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The wires should be inserted as far as they will go into the contact chamber (until the insulation touches the contact). Hold the wires in position and use the socket wrench to tighten. The used wire end should be cut off before connecting again. The connection screw may only be retightened once to prevent the litz wires from breaking. To prevent damage to the contact, the wire/cable should be mechanically intercepted at an appropriate distance from the connection point (e.g., by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly. The module cannot be used simultaneously with HC-B..-TMB-SD-IP65 and HC-B..-TMS-SD-IP65 protective covers.PE mounting plateThe PE plate must be pressed hard against the swing frame using the 4 screws. First loosen the 4 screws of the PE plate and then tighten them again once the module is fixed in the swing frame. |
| 最低房屋高度（环境条件） | 72 mm |
| 导体横截面（环境条件） | 25 mm² ... 40 mm² (The cross section specification refers to the geometric cross section of the cable used) |
| 连接方式（机械特性） | Axial screw connection |
| 连接符合标准（材料数据） | UL |
| 插入/拔出循环（环境条件） | ≥ 500 |
| 连接横截面 AWG（环境条件） | 3 ... 2 |
| 组装说明（机械特性） | - Use only flexible conductors,- Connection of wires with 5 mm an Allen wrench,- Housing height h ≥ 72 mm,- Connectors may only be operated without load/voltage. |
| 模块插槽数量（机械特性） | 2 |
| 根据 UL 94 标准评定的阻燃等级（材料数据） | V0 |
| 导线直径（含绝缘层）（环境条件下） | 12 mm (40 mm²) |
| 环境温度（工作）（电气特性） | -40 °C ... 125 °C |
| 单根导线的剥线长度（环境条件下） | 16 mm |
| 根据 UL 94 标准评定的阻燃等级（机械特性） | V0 |
产品描述
More details
主要特点
- 工业级品质
- 符合RoHS标准
- CE认证
- 一年保修
产品文档
数据表
技术规格和性能数据
用户手册
安装和操作指南
