| 参数 | 价值 |
|---|---|
| Can only be used in plastic housing | |
| 类型 | COM |
| 宽度 | 26.3 mm |
| 高度 | 52.3 mm |
| 长度 | 45.5 mm |
| 系列 | HC-COM |
| 一般的 | Connectors may be operated only when there is no load/voltage. |
| 应用 | Power/signal |
| 产品类型 | Contact insert with a fixed no. of positions |
| 额定电流 | 40 A (power contacts) |
| 密封材料 | NBR |
| 接触直径 | 4 mm |
| 联系材料 | Copper alloy |
| 联系电话 | 1 - 4 (power contacts) |
| 拧紧扭矩 | 0.5 Nm ... 0.8 Nm (Mounting screws for mounting in the HEAVYCON housing) |
| 连接配置文件 | 4+2+PE |
| 污染程度 | 3 |
| 尺寸图 | |
| 职位数量 | 6 |
| 额定浪涌电压 | 6 kV (Phase-phase power contacts) |
| 过电压类别 | III |
| 组装说明 | To ensure correct use, installation in housing with IP54 protection or better is required |
| 连接技术 | Crimp connection (power contacts) |
| 接触材料类型 | turned |
| 电源触点数量 | 4 |
| 额定电压(III/3) | 400 V (Phase-ground power contacts) |
| 标准/法规 | PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| 导体横截面 | 1.5 mm² ... 10 mm² (power contacts) |
| 控制触点数量 | 2 |
| 接触载体材料 | PC |
| 接触面材料 | Ag (alternatively Au) |
| 插入/拔出周期 | ≥ 500 |
| 连接横截面 AWG | 16 ... 8 (power contacts) |
| 环境温度(运行) | -40 °C ... 125 °C (including heating up of contacts) |
| 连接符合标准 | IEC / EN |
| 电源触点的额定电压 | 400/690 V |
| 每个位置的连接数 | 1 |
| 根据 UL 94 标准评定的阻燃等级 | V0 |
| 单根导线的剥线长度 | 9 mm (for 1.5 ... 2.5 mm²) |
| 接触面材料,电源触点 | Ag |
| 接触面材料,控制接触 | Ag (alternatively Au) |
技术规格和性能数据
安装和操作指南