| 参数 | 价值 |
|---|---|
| GTIN | 4017918941901 |
| 笔记 | Made to Order (non-returnable) |
| 订单密钥 | 1645972 |
| 产品目录页 | Page 555 (C-4-2015) |
| 包装单元 | 2 pc |
| 原产地 | DE (Germany) |
| 海关关税编号 | 85366990 |
| (环境条件) | 18 mm (for conductor >= 6.4 mm in diameter) |
| 最小订购量 | 2 pc |
| 联系材料(通用) | Copper alloy |
| 额定电流(尺寸) | 40 A |
| 宽度(关键商业数据) | 34.2 mm |
| (标准和法规) | No hazardous substances above threshold values |
| 高度(关键商业数据) | 44.7 mm |
| 长度(关键商业数据) | 14.6 mm |
| 连接配置文件(尺寸) | 3 |
| 额定浪涌电压(尺寸) | 6 kV |
| 接触载体材料(通用) | PC |
| 接触面材料(一般) | Ag |
| 额定电压(III/3)(尺寸) | 500 V |
| 系列(机械特性) | HC-M-03 |
| 单件重量(不含包装) | 14.950 g |
| 接触直径(环境条件) | 4 mm |
| 中国RoHS(标准和法规) | Environmentally friendly use period: unlimited = EFUP-e |
| 连接(机械特性) | The CK4,0-EWZ tool (order no. 1662735) is required for removing the crimp contacts.At every "C" contact chamber, the position of the contact retaining springs is marked with two black markings on the connection side. From the connection side, the tool is pushed over the contact in a position-oriented manner, so that it touches both the retaining springs. Then insert it up to the limit stop. Do not turn the inserted tool. Push the conductor out of the insulating body along with the tool from the connection side. |
| 接触类型(机械特性) | turned |
| 最低房屋高度(环境条件) | 52 mm |
| 导体横截面(环境条件) | 1.5 mm² ... 10 mm² |
| 电缆外径(环境条件) | 7.5 mm |
| 连接方式(机械特性) | Crimp connection |
| 连接符合标准(材料数据) | UL |
| 污染程度(机械特性) | 3 |
| 插入/拔出循环(环境条件) | ≥ 500 |
| 连接横截面 AWG(环境条件) | 16 ... 8 |
| 过电压类别(机械特性) | III |
| 组装说明(机械特性) | Housing height ≥ 52 mm.Plug-in connections may only be operated only when there is no load/voltage. |
| 模块插槽数量(机械特性) | 1 |
| 根据 UL 94 标准评定的阻燃等级(材料数据) | V0 |
| 导线直径(含绝缘层)(环境条件下) | 7.5 mm |
| 环境温度(工作)(电气特性) | -40 °C ... 125 °C |
| 单根导线的剥线长度(环境条件下) | 9 mm (for 1.5 ... 2.5 mm²) |
| 连接符合标准(机械特性) | IEC / EN |
| 根据 UL 94 标准评定的阻燃等级(机械特性) | V0 |
技术规格和性能数据
安装和操作指南