现货 热销产品
HC-M-02-MOD-ST
HC-M-02-MOD-ST 1679346 PHOENIX CONTACT HEAVYCON contact insert module, male, 2-pos., axial screw connection
$0.00
美元
库存 4329 件
主要规格
:
Note regarding axial connection technology:Only for stranded wires. The conductor cross sections stated refer to the geometric cross section of the cable used.Use of cables with a geometric cross section very different from that of the cable's nominal cross section should be checked before use.The wiring space of the axial screw method is designed for fine strand cables according to VDE 0295 class 5. Deviating cable structures (e.g. class 6 cables) should be checked before use.ConnectionBefore starting to connect, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The cores should be slid to the limit stop in the contact chamber (until insulation touches contact). Hold cores in position and use socket wrench to tighten. The used core end should be cut off before connecting again. The connection screw may only be retightened once to prevent the strands from breaking. To prevent damage to the contact, the core / cable should be mechanically intercepted at an appropriate distance from the connection point (e.g. by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly.
宽度:
34.2 mm
高度:
41.8 mm
长度:
14.6 mm
供应商信息
产品：0
通常在 2-3 个工作日内发货
质量保证
快速发货
技术支援
技术规格
| 参数 | 价值 |
|---|---|
| Note regarding axial connection technology:Only for stranded wires. The conductor cross sections stated refer to the geometric cross section of the cable used.Use of cables with a geometric cross section very different from that of the cable's nominal cross section should be checked before use.The wiring space of the axial screw method is designed for fine strand cables according to VDE 0295 class 5. Deviating cable structures (e.g. class 6 cables) should be checked before use.ConnectionBefore starting to connect, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The cores should be slid to the limit stop in the contact chamber (until insulation touches contact). Hold cores in position and use socket wrench to tighten. The used core end should be cut off before connecting again. The connection screw may only be retightened once to prevent the strands from breaking. To prevent damage to the contact, the core / cable should be mechanically intercepted at an appropriate distance from the connection point (e.g. by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly. | |
| 宽度 | 34.2 mm |
| 高度 | 41.8 mm |
| 长度 | 14.6 mm |
| 系列 | HC-M-02 |
| 一般的 | For HEAVYCON housing type B6 to B48, HC-M-MHR... hinged retaining frame required |
| 应用 | Power |
| 产品类型 | Modular contact insert |
| 组装说明 | - Connection of the wires using a 2 mm Allen wrench.- Housing height ≥ 52 mm.- Axial screw connection only for flexible wires.- Plug-in connections may only be operated only when there is no load/voltage. |
| 额定电流 | 40 A |
| 联系材料 | Copper alloy |
| 六角插座 | SW 2 |
| 联系电话 | 1 - 2 |
| 拧紧扭矩 | 1.5 Nm (2.5 mm² ... 4 mm²) |
| 连接配置文件 | 2 |
| 污染程度 | 3 |
| 尺寸图 | |
| 职位数量 | 2 |
| 额定浪涌电压 | 8 kV |
| 过电压类别 | III |
| 连接技术 | Axial screw connection |
| 额定电压（III/3） | 1000 V |
| 模块插槽数量 | 1 |
| 导体横截面 | 2.5 mm² ... 8 mm² (The cross section specification refers to the geometric cross section of the cable used) |
| 接触载体材料 | PC |
| 接触面材料 | Ag |
| 插入/拔出周期 | ≥ 500 |
| 连接横截面 AWG | 12 ... 10 |
| 环境温度（运行） | -40 °C ... 125 °C |
| 连接符合标准 | IEC / EN |
| 根据 UL 94 标准评定的阻燃等级 | V0 |
| 单根导线的剥线长度 | 8 mm +1 mm (for 6 mm²) |
产品描述
More details
主要特点
- 工业级品质
- 符合RoHS标准
- CE认证
- 一年保修
产品文档
数据表
技术规格和性能数据
用户手册
安装和操作指南
