现货 热销产品
UST4C11
UST4C11 ST4-C11 PANASONIC Controller for ST4
$0.00
美元
库存 3452 件
主要规格
物品:
Specifications
PFHD:
Refer to the following table(Note： (Probability of dangerous failure per hour) depends on number of single beam sensorST4-A□connected to controller.)
MTTFD:
More than 100 years (Note：Mean time to dangerous failure (in years))
重量:
Net weight: 180 g approxGross weight: 390 g approx
供应商信息
PANASONIC
产品：4316
通常在 2-3 个工作日内发货
质量保证
快速发货
技术支援
技术规格
| 参数 | 价值 |
|---|---|
| 物品 | Specifications |
| PFHD | Refer to the following table(Note： (Probability of dangerous failure per hour) depends on number of single beam sensorST4-A□connected to controller.) |
| MTTFD | More than 100 years (Note：Mean time to dangerous failure (in years)) |
| 重量 | Net weight: 180 g approxGross weight: 390 g approx |
| 细节 | Controller |
| 产品 | Compact Type 4 Safety Beam Sensor |
| 材料 | Enclosure: ABS |
| 零件编号 | ST4-C11 |
| 产品名称 | Compact Type 4 Safety Beam Sensor ST4 |
| 电线电缆 | Terminal block connector: 0.2 to 1.5 mm2 |
| 电源电压 | 24 V DC +10-15 % Ripple P-P 10 % or less |
| 响应时间 | OFF response: 25 ms or lessON response: 90 ms or less (auto reset) / 140 ms or less (manual reset) |
| 产品编号 | ST4-C11 |
| 辅助输出 | PNP open-collector transistor / NPN open-collector transistor (Set using output polarity selection switch)ST4-C11: one outputST4-C12EX: four outputs[PNP output]Maximum source current: 100 mAApplied voltage: same as the supply voltage (between auxiliary output and +V)Residual voltage: 2.5 V or less (at 100 mA source current)[NPN output]Maximum sink current: 100 mAApplied voltage: same as the supply voltage (between auxiliary output and 0 V)Residual voltage: 2.0 V or less (at 100 mA sink current)(Note) If the total current of the control outputs (OSSD1, OSSD2), auxiliary outputs, and muting lamp output exceeds 400 mA, the wiring resistance between the controller and the power supply should be 1 Ohm or less. In addition, if the total current is 400 mA or less, the wiring resistance between the controller and the power supply should be 2 Ohm or less. |
| 静音灯输出 | -(Note) If the total current of the control outputs (OSSD1, OSSD2), auxiliary outputs, and muting lamp output exceeds 400 mA, the wiring resistance between the controller and the power supply should be 1 Ohm or less. In addition, if the total current is 400 mA or less, the wiring resistance between the controller and the power supply should be 2 Ohm or less. |
| 连接终端 | Detachable spring-cage terminal |
| 当前消耗 | 100 mA or less (excluding sensor head ST4-Ax) |
| 适用标准 | IEC 61496-1/2 (JIS B 9704-1/2 / UL 61496-1/2) (Type 4), ISO 13849-1:2015 (Category 4, PLe), JIS B 9705-1 (Category 4), IEC 61508-1 to 3 (SIL3), IEC 62061 (SIL3), JIS C 0508-1 to 3 (SIL3), UL 1998, OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI/RIA R15.06, ANSI/ISA S84.01 (SIL3)(Note) Complies with those standards only when the controller is used in combination with the sensor head ST4-x. |
| 适用传感器头 | ST4-Ax |
| CE标志指令符合性 | Machinery Directive, EMC Directive, RoHS Directive |
| 辅助输出：操作模式 | OFF when all beams of the connected ST4-Axs are receivedON when one or more beams of the connected ST4-Axs are interrupted |
| 控制输出（OSSD 1、OSSD 2） | PNP open-collector transistor / NPN open-collector transistor Dual output x 1 system (Set using output polarity selection switch)[PNP output]Maximum source current: 200 mAApplied voltage: same as the supply voltage (between control output and +V)Residual voltage: 2.5 V or less (at 200 mA source current)Leakage current: 200 micro A or less (including power OFF condition)Maximum load capacity: 1 micro F (from no-load to max. source current)Load wiring resistance: 3 Ohm or less (between control output and load)[NPN output]Maximum sink current: 200 mAApplied voltage: same as the supply voltage (between control output and 0 V)Residual voltage: 2.0 V or less (at 200 mA sink current)Leakage current: 200 micro A or less (including power OFF condition)Maximum load capacity: 1 micro F (from no-load to max. sink current)Load wiring resistance: 3 Ohm or less (between control output and load)(Note) If the total current of the control outputs (OSSD1, OSSD2), auxiliary outputs, and muting lamp output exceeds 400 mA, the wiring resistance between the controller and the power supply should be 1 Ohm or less. In addition, if the total current is 400 mA or less, the wiring resistance between the controller and the power supply should be 2 Ohm or less. |
| 辅助输出：保护电路 | Incorporated |
| 静音灯输出：保护电路 | Incorporated |
| 环境耐受性：环境湿度 | 30 to 85 % RH, Storage: 30 to 95 % RH |
| 环境耐受性：抗冲击性 | 300 m/s2acceleration in X, Y and Z directions three times each |
| 环境耐受性：环境温度 | －10 to +55 ℃+14 to +131℉(No dew condensation or icing allowed),Storage: －25 to +70 ℃－13 to +158℉ |
| 环境耐受性：防护程度 | Enclosure: IP40 (IEC)Terminal: IP20 (IEC) |
| 环境耐受性：抗振性 | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude or maximum acceleration 90 m/s2 in X, Y and Z directions for two hours each< |
| 环境耐受性：绝缘阻力 | 20 MOhm or more with 500 V DC mega between all supply terminals connected together and enclosure |
| 控制输出（OSSD 1、OSSD 2）：操作模式 | ON when all beams of the connected ST4-Axs are receivedOFF when one or more beams of the connected ST4-Axs are interruptedOFF during lockout |
| 适用传感器头：串联连接数 | Interference prevention possible when up to a maximum of 6 sets are connected(When the maximum of 3 controllers are connected together, interference prevention is possible for up to 18 sets) |
| 控制输出（OSSD1、OSSD2）：保护电路 | Incorporated |
| 环境耐受性：耐压能力 | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
产品描述
Standard Control Unit Safety Barrier Category 4 Ple SIL 3, ST4 Series
主要特点
- 工业级品质
- 符合RoHS标准
- CE认证
- 一年保修
产品文档
数据表
技术规格和性能数据
用户手册
安装和操作指南
