现货 热销产品
USFC21
USFC21 SF-C21 PANASONIC Safety control unit for safety light curtain and other safety products, 8 inputs 24V..
$0.00
美元
库存 4642 件
主要规格
物品:
Specifications
重量:
Net weight: 190 g approx.Gross weight: 320 g approx.
产品:
Safety Control Unit
材料:
Main unit enclosure: Polycarbonate / ABS polymer alloyEnclosure: Polycarbonate
供应商信息
PANASONIC
产品：4316
通常在 2-3 个工作日内发货
质量保证
快速发货
技术支援
技术规格
| 参数 | 价值 |
|---|---|
| 物品 | Specifications |
| 重量 | Net weight: 190 g approx.Gross weight: 320 g approx. |
| 产品 | Safety Control Unit |
| 材料 | Main unit enclosure: Polycarbonate / ABS polymer alloyEnclosure: Polycarbonate |
| PFHD/ MTTFD | 9.73 x 10−10/ 100 years or more |
| 零件编号 | SF-C21 |
| 电缆长度 | 100 m328.084 ftor less |
| 产品名称 | Safety Control Unit SF-C21 |
| 产品编号 | SF-C21 |
| 污染程度 | 2 |
| 连接方式 | Input / output and power supply: Detachable spring cage termina l blocksRS-485: Detachable spring-cage terminal blockUSB: Mini-B male |
| 相关标准 | IEC 60947-1, IEC 60947-5-1, IEC 60947-5-2, IEC 60947-5-5, IEC 60947-5-8, IEC 61496-1, IEC TS 62046, ISO 13851 |
| 联锁功能 | Incorporated |
| 运行高度 | 2,000 m6561.680 ftor less(Note) Do not use or store this device in a pressurized environment beyond the atmospheric pressure at sea level. |
| 抗振性能 | 5 to 8.4 Hz frequency, 3.5 mm0.138 inhalf amplitude, 8.4 to 150 Hz frequency, Max. acceleration 9.8 m/s2(1 G), in X, Y and Z directions for two hours each (IEC / EN 60068-2-6) |
| 逻辑设置功能 | Input mode, control mode, output mode, reset mode, auxiliary ou tput mode |
| 过电压类别 | II |
| 静音指示器输出 | Semiconductor photo MOS relay output x 1- Maximum load current: 60 mA- Supply voltage: Same as the voltage of the power supply for internal- Residual voltage: 2.5 V or less- Leakage current: 100 μA or less (Including power supply OFF condition) |
| 锁定释放功能 | Incorporated |
| 逻辑选择功能 | No.0: Customization controlNo.1: Overall stop controlNo.2: Parallel muting controlNo.3: Sequential muting controlNo.4: Partial stop control 1No.5: Partial stop control 2No.6: Two-hand controlNo.7: OR controlNo.8: Operation mode selection control |
| 安全输入（IN1 至 IN8） | 2 inputs x 4, Rated voltage: Same as the voltage of the power supply for internal |
| 适用标准：EMC | IEC 61000-6-2, IEC 61326-3-1, EN 55011 |
| 通电后的启动时间 | 2 sec. or less |
| 适用标准：安全 | IEC 61508-1 to 3, EN 61508-1 to 3 (SIL3), ISO 13849-1:2015 (Category 4, PLe), IEC 61131-2, IEC 61010-2-201, IEC 62061 (SILCL3), UL 61010-1, UL 61010-2-201, UL 1998 |
| 控制输出（OUT1 至 OUT4） | PNP open-collector transistor with 2 outputs x 2- Maximum source current: 300 mA / output- Applied voltage: Same as the voltage of the power supply for external- Residual voltage: 2.5 V or less- Leakage current: 100 μA or less (Including power supply OFF condition) |
| 通信功能（MODBUS RTU） | Interface: RS-485Protocol: MODBUS RTUMaximum transmission distance: 100 m328.084 ftMaximum number of units that can be connected: 8 units (slaves) |
| 外部设备监控功能 | Incorporated |
| 安全输入（IN1 至 IN8）：开启 | Input voltage: 18 VInput current: 3.5 mA |
| 静音指示灯输出：输出模式 | ON when muting / override |
| 安全输入（IN1 至 IN8）：关闭级别 | Input voltage: 5 VInput current: 1.0 mA |
| 静音指示输出：响应时间 | 10 ms or less |
| 适用的法规和认证 | CE Marking (Machinery Directive, EMC Directive, RoHS Directive), UKCA Marking [Supply of Machinery (Safety)Regulations, EMC Regulations, RoHS Regulations], TÜV SÜD certification, Korea's Radio Waves Act conformity registration |
| 环境耐受性：环境湿度 | 30 to 85 % RH, Storage: 30 to 85 % RH |
| 环境耐受性：抗冲击性 | 147 m/s2(15 G) 11 ms in X, Y and Z directions for three times each (IEC / EN 60068-2-27) |
| 供电电压：外部电源 | 24 V DC+10-15% Ripple P-P10 % or less(Note) "Power supply for external" is the power supply for control output / auxiliary output. The power supplies for internal and external are insulated.(Note) The power supply unit connected to this device must satisfy the conditions below.- Output voltage within 20.4 V to 26.4 V DC (Ripple P-P: 10 % or less.)- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Directive and Low-voltage Directive (In case CE Marking conformity is required.)- Power supply unit conforming to the Low-voltage Directive and with an output of 100 VA or less- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Regulations and Low-voltage Regulations (In case UKCA Marking conformity is required.)- Power supply unit with an output holding time of 20 ms or more.- Power supply unit corresponding to CLASS 2 (In case C-TÜV US Listing Mark conformity is required.) |
| 供电电压：内部电源 | 24 V DC+10-15% Ripple P-P10 % or less(Note) "Power supply for internal" is the power supply for safety input. The power supplies for internal and external are insulated.(Note) The power supply unit connected to this device must satisfy the conditions below.- Output voltage within 20.4 V to 26.4 V DC (Ripple P-P: 10 % or less.)- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Directive and Low-voltage Directive (In case CE Marking conformity is required.)- Power supply unit conforming to the Low-voltage Directive and with an output of 100 VA or less- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Regulations and Low-voltage Regulations (In case UKCA Marking conformity is required.)- Power supply unit with an output holding time of 20 ms or more.- Power supply unit corresponding to CLASS 2 (In case C-TÜV US Listing Mark conformity is required.) |
| 控制输出（OUT1 至 OUT4）：输出模式 | True: ONFalse: OFF |
| 安全输入（IN1 至 IN8）：输入阻抗 | 4.7 KΩ approx. |
| 环境耐受性：环境温度 | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: -25 to +60 ℃-13 to +140 ℉ |
| 控制输出（OUT1 至 OUT4）：响应时间 | OFF response: 10 ms or lessON response: 100 ms or less |
| 环境耐受性：防护程度 | IP20 (IEC)(must be installed in a control panel with protectio n IP54 or higher) |
| 环境耐受性：绝缘阻力 | 20 MΩ, or more, with 500 V DC megger(All inputs connected together - USB port, all inputs connected together - RS-485 port, USB port - RS-485 port, between all supply terminals connected together and enclosure, all outputs connected together - all input connected together, all outputs connected together - USB port, all outputs connected together - RS-485 port) |
| 当前功耗：外部电源 | 100 mA or less(Note) "Power supply for external" is the power supply for control output / auxiliary output. The power supplies for internal and external are insulated.(Note) The power supply unit connected to this device must satisfy the conditions below.- Output voltage within 20.4 V to 26.4 V DC (Ripple P-P: 10 % or less.)- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Directive and Low-voltage Directive (In case CE Marking conformity is required.)- Power supply unit conforming to the Low-voltage Directive and with an output of 100 VA or less- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Regulations and Low-voltage Regulations (In case UKCA Marking conformity is required.)- Power supply unit with an output holding time of 20 ms or more.- Power supply unit corresponding to CLASS 2 (In case C-TÜV US Listing Mark conformity is required.) |
| 当前功耗：内部电源 | 200 mA or less(Note) "Power supply for internal" is the power supply for safety input. The power supplies for internal and external are insulated.(Note) The power supply unit connected to this device must satisfy the conditions below.- Output voltage within 20.4 V to 26.4 V DC (Ripple P-P: 10 % or less.)- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Directive and Low-voltage Directive (In case CE Marking conformity is required.)- Power supply unit conforming to the Low-voltage Directive and with an output of 100 VA or less- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Regulations and Low-voltage Regulations (In case UKCA Marking conformity is required.)- Power supply unit with an output holding time of 20 ms or more.- Power supply unit corresponding to CLASS 2 (In case C-TÜV US Listing Mark conformity is required.) |
| 安全输入（IN1 至 IN8）：额定输入电流 | 5 mA approx. |
| 辅助输出（AUX1 至 AUX4）（非安全输出） | PNP open-collector transistor with 1 output x 4- Maximum source current: 60 mA / output- Applied voltage: Same as the voltage of the power supply for external- Residual voltage: 2.5 V or less- Leakage current: 100 μA or less (Including power supply OFF condition) |
| 控制输出（OUT1 至 OUT4）：延时开启功能 | Incorporated |
| 环境耐受性：耐压能力 | 1,000 V AC for one min.(All inputs connected together - USB port, all inputs connected together - RS-485 port, USB port - RS-485 port, between all supply terminals connected together and enclosure, all outputs connected together - all input connected together, all outputs connected together - USB port, all outputs connected together - RS-485 port) |
| 控制输出（OUT1 至 OUT4）：关闭延时功能 | Incorporated |
| 静音指示输出：短路保护 | Incorporated |
| 控制输出（OUT1 至 OUT4）：短路保护 | Incorporated |
| 安全输入（IN1 至 IN8）：可检测到的开启状态持续时间 | 10 ms or more |
| 安全输入（IN1 至 IN8）：无法检测的关闭状态持续时间 | 0.7 ms or less |
| 辅助输出（AUX1 至 AUX4）（非安全输出）：响应时间 | 10 ms or less |
| 辅助输出（AUX1 至 AUX4）（非安全输出）：短路保护 | Incorporated |
| 辅助输出（AUX1 至 AUX4）（非安全输出）：输出模式（出厂默认设置） | AUX1: Negative logic of OUT1 / OUT2 (ON when OUT1 / OUT2 is OFF)AUX2: Negative logic of OUT3 / OUT4 (ON when OUT3 / OUT4 is OFF)AUX3: Reset trigger output (ON under reset release wait condition)AUX4: Lockout output (OFF when lockout) |
| 辅助输出（AUX1 至 AUX4）（非安全输出）：输出模式（任何辅助输出均可使用软件工具进行自定义） | Negative logic of OUT1 / OUT2 (ON when OUT1 / OUT2 is OFF)Negative logic of OUT3 / OUT4 (ON when OUT3 / OUT4 is OFF)Positive logic of OUT1 / OUT2 (ON when OUT1 / OUT2 is ON)Positive logic of OUT3 / OUT4 (ON when OUT3 / OUT4 is ON)Outputs A, B, C, and D of diagnosis results of input blocks (ON when logic is true)Outputs E, F, and G of internal logic circuit diagnostic results (ON when logic is true)Reset trigger output (ON under reset release wait condition)Lockout output (OFF when lockout)Muting indicator output (ON when muting / override)Monitor output in response to IN1 to IN8 (ON when input)No output (normally OFF) |
产品描述
Control unit for barriers and other safety products, Cat. 4(Ple) and SIL3, 4 inputs, 2 outputs, 8 pre-established logics according to cat regulations. 4 (Ple) and 1 customizable logic, self-diagnostic
主要特点
- 工业级品质
- 符合RoHS标准
- CE认证
- 一年保修
产品文档
数据表
技术规格和性能数据
用户手册
安装和操作指南
