现货 热销产品
UHLT1005A
UHLT1005A HLT1005A HL-T1005A PANASONIC HL-T1 sensor heads, 5 mm type
$0.00
美元
库存 3084 件
主要规格
物品:
Specifications
类型:
Sensing width 5 mm0.197 intype
电缆:
0.09mm23-core shielded cable with connector, 0.5 m1.640 ftlong
重量:
Emitter: 15 g approx.Receiver: 15 g approx.
供应商信息
PANASONIC
产品：4316
通常在 2-3 个工作日内发货
质量保证
快速发货
技术支援
技术规格
| 参数 | 价值 |
|---|---|
| 物品 | Specifications |
| 类型 | Sensing width 5 mm0.197 intype |
| 电缆 | 0.09mm23-core shielded cable with connector, 0.5 m1.640 ftlong |
| 重量 | Emitter: 15 g approx.Receiver: 15 g approx. |
| 细节 | Sensor head (Sensing width 5 mm0.197 intype) |
| 产品 | Ultra-compact Laser Collimated Beam Sensor |
| 材料 | Enclosure: PolyetherimideCase cover: PolycarbonateFront cover: Glass |
| 配饰 | MS-HLT1-1(Sensor head mounting bracket): One set of two brackets for both the emitter and the receiverCN-HLT1-1(Sensor head to controller connection cable): 1 cableLaser beam alignment sticker: 2 pcs.Label set (FDA regulations conformed type only): 1 set |
| 零件编号 | HL-T1005A |
| 产品名称 | Ultra-compact Laser Collimated Beam Sensor HL-T1 |
| 感应范围 | ■■【In the case of(0 to 500 mm 0to 19.685 in)】■■Sensing width:ø1 mmø0.039 inMin. sensing object:ø8 micro mø0.315 milopaque objectRepeatability (During the state in which light is half blocked):4 micro m0.157 mil(Note：In case of an average sampling rate of 64 times.)Linear output resolution:4 micro m0.157 mil(Note) In case of an average sampling rate of 64 times.(Note)Value calculated with the linear output allowance factor (plus or minus 3 sigma) when connected to the controller included in the calculation of the detection width.(Note：This value was obtained by converting the range of linear output fluctuation (plus or minus 3 sigma) into a sensing width, assuming that the smallest sensing object blocks the beam at the approximate center of the beam diameter of ø1 mmø0.039 in.)■■【In the case of (500 to 2,000 mm19.685 to 78.74 in)】■■Sensing width:ø1 to ø2.5 mmø0.039 to ø0.098 inMin. sensing object:ø50 micro mø1.969 milopaque objectRepeatability (During the state in which light is half blocked): -Linear output resolution: -- |
| 产品编号 | HL-T1005A |
| 电缆延长线 | Extension up to total 10 m32.808 ftis possible, with the optional cable. |
| 污染程度 | 3 (industrial environment) |
| 排放指标 | Green LED (lights up during laser emission) |
| 适用控制器 | HL-AC1, HL-AC1P |
| 绝缘电阻 | 100 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| 耐压能力 | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| CE标志指令符合性 | EMC Directive, RoHS Directive |
| 干扰抑制功能 | Two units of sensors can be mounted close together. (When the controller interference prevention function is used) |
| 环境耐受性：环境湿度 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 环境耐受性：抗冲击性 | 300 m/s2acceleration (30 G approx.) in X, Y and Z directions three times each |
| 环境耐受性：环境光照度 | Incandescent light: 10,000 liter x or less at the light-receiving face |
| 环境耐受性：环境温度 | 0 to +50 ℃+32 to +122 ℉(No dew condensation allowed), Storage: -25 to +65 ℃-13 to +149 ℉ |
| 环境耐受性：抗振性 | 10 to 500 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| 发光元件：符合FDA法规的类型 | Red semiconductor laser Class II (FDA)(modulated, max. output: 0.35 mW, peak emission wavelength: 650 nm0.026 mil)(IEC / JIS: Class 1) |
| 发光元件：符合IEC/JIS标准的类型 | Red semiconductor laser Class 1 (IEC / JIS)(modulated, max. output: 0.35 mW, peak emission wavelength: 650 nm0.026 mil) |
产品描述
HLT1 Series Analog Barrier Laser Emitter-Clevy, 5mm Beam Width, 500mm Range
主要特点
- 工业级品质
- 符合RoHS标准
- CE认证
- 一年保修
产品文档
数据表
技术规格和性能数据
用户手册
安装和操作指南
