现货 热销产品
UHLC2CEP
UHLC2CEP HL-C2CE-P PANASONIC Control unite HL-C2, low resolution, -5 to +5V, 4-20mA, PNP-type
$0.00
美元
库存 4400 件
主要规格
物品:
Specifications
重量:
450 g approx.
细节:
Controller
产品:
Ultra High-speed High-precision Laser Displacement Sensor
供应商信息
PANASONIC
产品：4316
通常在 2-3 个工作日内发货
质量保证
快速发货
技术支援
技术规格
| 参数 | 价值 |
|---|---|
| 物品 | Specifications |
| 重量 | 450 g approx. |
| 细节 | Controller |
| 产品 | Ultra High-speed High-precision Laser Displacement Sensor |
| 材料 | Case: Polycarbonate |
| 配饰 | USB cable (2 m 6.562 ft long): 1 pc.Short bracket: 1 pc. |
| 零件编号 | HL-C2CE-P |
| 复位输入 | Reset is done when connected to external power (+).Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| 报警输出 | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less(between alarm output and +V)- Residual voltage: 1 V or less(at 100 mA source current) |
| 产品名称 | Ultra High-speed・High-precision Laser Displacement Sensor HL-C2 |
| 时序输入 | ON at/during connection to external power (+)(depending on analysis mode)Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| 采样率 | 10 micro s, 20 micro s, 40 micro s, 100 micro s, 200 micro s, 400 micro s, 1 ms, 2 ms |
| 频闪输出 | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less(between strobe output to +V)- Residual voltage: 1 V or less(at 100 mA source current) |
| 产品编号 | HL-C2CE-P |
| 供电电压 | 24 V DC plus or minus 10 % including ripple 0.5 V (P-P) |
| 零设置输入 | Zero set is ON when connected with external power (+).Zero set turns to OFF after continuously connected to external power (+) for one second.Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) |
| 指示灯：电源 | Green LED (lights up at power on) |
| 当前消耗 | 500 mA approx. at 2 sensor heads connected350 mA approx. at 1 sensor head connected(100 mA approx. is additionally required when the mini console is connected) |
| 指示器：报警 1 | Red LED (lights up when OUT1 can not be measured due to insufficient amount of light) |
| 指示器：报警 2 | Red LED (lights up when OUT2 can not be measured due to insufficient amount of light) |
| 激光控制输入 | Laser emission is stopped when connected to external power (+).Laser is emitted immediately after opened.Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| 内存变更输入 | Memory is specified when connected to external power (+).Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| Connectale传感器头 | Number of connectable units: Max. 2 units. |
| 远程联锁输入 | Laser emission is delayed when connected to IL (+).Laser emission stop at openApplied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| 模拟输出：电流 | Current output scale: 4 to 20 mA/F.S (initial value)Output range during normal status: 2 to 24 mAOutput at abnormal status: 1 mA or 25 mAResolution: 3 micro A, Linearity plus or minus 0.05% F.S.Load impedance: 250 Ohm max., Response delay time: 10 micro s approx.(Note) The linearity is F.S.=16 mA to digital measurement value. Response delay time is the period after update of measurement value. |
| 模拟输出：电压 | Voltage output scale: -5 to +5 V/F.S (initial value)Output range during normal status: -10.0 to +10.0 VOutput at abnormal status: -10.8 V or +10.8 VResolution: 2 mV, Linearity: plus or minus 0.05 % F.S.Max. 2 mA, output impedance 50 Ohm , Response delay time: 1.5 micro s/V approx.(Note) The linearity is F.S.=20 V to digital measurement value. Response delay time is the period after update of measurement value. |
| 判断结果（HI、GO、LO） | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less(between judgment output to +V)- Residual voltage: 1 V or less(at 100 mA source current) |
| 报警输出：输出操作 | Opened when the amount of light is insufficient |
| 选通输出：输出操作 | Opened at data determination |
| 报警输出：短路保护 | Incorporated |
| 频闪输出：短路保护 | Incorporated |
| 指示器：传感器头 A 激光辐射 | Green LED (lights up during or immediately before laser emission of sensor head A) |
| 指示器：传感器头 B 激光辐射 | Green LED (lights up during or immediately before laser emission of sensor head B) |
| 环境耐受性：环境湿度 | 35 to 85 %RH |
| 环境耐受性：抗冲击性 | 196 m/s2 acceleration (20 G approx.) in X,Y and Z directions for three times each |
| 环境耐受性：环境温度 | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| 判断输出（HI、GO、LO）：输出操作 | Opened at output operation |
| 环境耐受性：抗振性 | 10 to 55 Hz frequency (period: 1 min.), 0.75 mm 0.030 in amplitude in X, Y and Z directions for 30 min. each |
| 判断输出（高、正常、低）：短路保护 | Incorporated |
产品描述
High performance analog laser low resolution controller, HL-C2 series, RS232 port, analog output ±5V/ 4 - 20mA, PNP digital output
主要特点
- 工业级品质
- 符合RoHS标准
- CE认证
- 一年保修
产品文档
数据表
技术规格和性能数据
用户手册
安装和操作指南
