现货 热销产品
UHLAC1
UHLAC1 HLAC1 HL-AC1 PANASONIC HL-T1 sensor controller, NPN, 12-24VDC
$0.00
美元
库存 3192 件
主要规格
物品:
Specifications
类型:
NPN output
重量:
Net weight: 140 g approx.
细节:
Controller (NPN output)
供应商信息
PANASONIC
产品：4316
通常在 2-3 个工作日内发货
质量保证
快速发货
技术支援
技术规格
| 参数 | 价值 |
|---|---|
| 物品 | Specifications |
| 类型 | NPN output |
| 重量 | Net weight: 140 g approx. |
| 细节 | Controller (NPN output) |
| 产品 | Ultra-compact Laser Collimated Beam Sensor |
| 材料 | Enclosure: Polybutylene terephthalateTransparent cover: Polycarbonate |
| I/O电缆 | 0.09 mm210-core composite cable, 2 m6.562 ftlong |
| 零件编号 | HL-AC1 |
| 复位输入 | 0 V connection: EffectiveOpen: Ineffective-Applied voltage: 30 V DC or less (leak current: 0.1 mA or less) |
| 产品名称 | Ultra-compact Laser Collimated Beam Sensor HL-T1 |
| 时序输入 | 0 V connection: EffectiveOpen: Ineffective-Applied voltage: 30 V DC or less (leak current: 0.1 mA or less) |
| 线性输出 | Current / voltage output switchable (Note)-During current output: 4 to 20 mA/F.S., Maximum load resistance: 300 Ohm-During voltage output: plus or minus 4 V/F.S., Output impedance 100 Ohm(In the monitor focus function, it can also be set at plus or minus 5 V, 0 to 5 V, etc.)(Note) Switching between current and voltage is accomplished by a switch on the bottom of the controller. |
| 主要功能 | ・Measured value display・Setting value, light amount value resolution display・Standard received light setting・Automatic scaling・Scaling・Display reverse・ECO display・Display digits limitation・Sample hold・Peak hold・Bottom hold・Peak to peak hold・Self peak hold・Self bottom hold・Zero reset・Initial reset・ON-delay timer・OFF-delay timer・One-shot timer・Differentiation・Sensitivity selection・Threshold value direct setting・Positioning teaching・2-point teaching・Automatic teaching・Hysteresis width variability・Monitor focus・Non-measuring time setting・(A – B) calculation(Note：The calculation unit is necessary.)・(A + B) calculation(Note：The calculation unit is necessary.)・Mutual interference prevention (Note：The calculation unit is necessary.)・Laser deterioration detection・Key lock・Zero reset memory |
| 产品编号 | HL-AC1 |
| 供电电压 | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| 激光关闭输入 | 0 V connection: Laser emission haltOpen: Laser emission-Applied voltage: 30 V DC or less (leak current: 0.1 mA or less) |
| 测量周期 | 150 micro s |
| 污染程度 | 3 (industrial environment) |
| 零复位输入 | 0 V connection: Zero reset operatesOpen: Zero reset ineffective-Applied voltage: 30 V DC or less (leak current: 0.1 mA or less) |
| 当前消耗 | 190 mA or less (when connected to the sensor head) |
| I/O 电缆延长线 | Extension up to total 10 m32.808 ftis possible, with 0.09 mm2or more, cable.(Note) If the extension cable is longer than 10 m32.808 ft, then it will not qualify for CE marking. |
| 子数字显示 | 5 digit yellow LED display[RUN mode: Either the resolution or laser beam reception amount will be displayed. THR mode: The threshold value will be displayed., Reverse mode: The display orientation will be reversed.] |
| 主数字显示屏 | 5 digit red LED display[RUN mode: Either the measured value (mm) or the hold value will be displayed. Reverse mode: The display orientation will be reversed.] |
| 绝缘电阻 | 20 MOhm , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| 适用传感器头 | HL-T1001A/T1001F, HL-T1005A/T1005F, HL-T1010A/T1010F |
| 耐压能力 | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| 指标：启用（ENABLE） | Green LED (lights up during normal operation) |
| 指标：判断结果 | HIGH: Orange LED (lights up when measured value > HIGH threshold value)PASS: Green LED (lights up when HIGH threshold value >= measured value >= LOW threshold value)LOW: Yellow LED (lights up when LOW threshold value > measured value) |
| 指示器：零重置（ZERO） | Green LED (lights up when the zero reset function is enabled) |
| 可设定的平均采样率 | 1 / 2 / 4 / 8 / 16 / 32 / 64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096(Note) The judgment output and linear output and linear output response time is calculated by (Measuring cycle) x (Set average sampling rate + 1). |
| CE标志指令符合性 | EMC Directive, RoHS Directive |
| 判断结果（高、通过、低） | NPN open-collector transistor-Maximum sink current: 50 mA-Applied voltage: 30 V DC or less (between judgment output and 0 V)-Residual voltage: 1.2 V or less (at 50 mA sink current) |
| 指示灯：激光发射（LD ON） | Green LED (lights up during laser emission) |
| 环境耐受性：环境湿度 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 环境耐受性：抗冲击性 | 300 m/s2acceleration (30 G approx.) in X, Y and Z directions three times each |
| 线性输出：温度特性 | plus or minus 0.2 % F.S./℃(Note) These are the temperature characteristics of the linear output when the sensor head is connected. |
| 环境耐受性：环境温度 | 0 to +50 ℃+32 to +122 ℉(No dew condensation allowed), Storage: -25 to +65 ℃-13 to +149 ℉ |
| 环境耐受性：抗振性 | 10 to 150 Hz frequency, 0.7 mm0.028 indouble amplitude in X, Y and Z directions for 80 min. |
| 判断输出（高、通过、低）：输出操作 | HIGH: ON when measured value > HIGH threshold valuePASS: ON when HIGH threshold value >= measured value >= LOW threshold valueLOW: ON when LOW threshold value > measured value |
| 判断结果（高、通过、低）：结果数量 | HIGH / PASS / LOW 3 values output |
| 判断结果（高、合格、低）：利用率类别 | DC-12 or DC-13 |
| 判断输出（高电平、通过、低电平）：短路保护 | Incorporated |
产品描述
HLT1 Series Controller, 12-24 VDC Power, NPN Digital Output, Selectable Analog Output between 4-20mA and ±4V
主要特点
- 工业级品质
- 符合RoHS标准
- CE认证
- 一年保修
产品文档
数据表
技术规格和性能数据
用户手册
安装和操作指南
