现货 热销产品
UHGS1010AC
UHGS1010AC HG-S1010-AC PANASONIC HG-S Sensor for measurement by contact. Head sensor with pneumatic actuator..
$0.00
美元
库存 4292 件
主要规格
物品:
Specifications
评论:
Where measurement conditions are not specified, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature of +20 ℃+68 ℉, and a clean atmosphere where water, oil, other liquids or dust does not come in contact with the equipment.
中风:
10.5 mm0.413 inor more(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point.
重量:
Net weight: 80 g approx.
供应商信息
PANASONIC
产品：4316
通常在 2-3 个工作日内发货
质量保证
快速发货
技术支援
技术规格
| 参数 | 价值 |
|---|---|
| 物品 | Specifications |
| 评论 | Where measurement conditions are not specified, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature of +20 ℃+68 ℉, and a clean atmosphere where water, oil, other liquids or dust does not come in contact with the equipment. |
| 中风 | 10.5 mm0.413 inor more(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point. |
| 重量 | Net weight: 80 g approx. |
| 细节 | Air-driven type10 mm0.394 intype General purpose |
| 产品 | Contact-Type Digital Displacement Sensor |
| 材料 | Body: Zinc, Holder: Stainless steel, Spindle: Tool steel, Probe (Note): Brass (body) / Ceramic (ball),, Air tube clamp: S60CM(Note) : The probe is also available as an option. |
| 配饰 | Sensor head fastening wrench: 1 pc., Mounting nut: 1 pc., Seal cap: 1pc, Air tube clamp: 1 pc. |
| 解决 | 0.5 μm0.02 mil |
| 零件编号 | HG-S1010-AC |
| 产品名称 | Contact-Type Digital Displacement Sensor HG-S |
| 可用液体 | Clean air (Dew point temperature: -10 ℃+14 ℉or less) |
| 采样率 | 1 ms |
| 产品编号 | HG-S1010-AC |
| 适用管 | Outside diameter: ø4 mmø0.157 in/ Inside diameter: ø2.5 mmø0.098 in |
| 测量力 | ・Measuring force changes with the air pressure used. Removing the seal cap enables the product to be used as the low measuring force type.・For the relationship between supplied air pressure and measuring force or between measuring force and pushed spindle position, see the figures below. For upward mount without a seal cap, subtract 0.2 N from the measuring force. For side mount, subtract 0.1 N from the measuring force. The following figures are only typical examples, and these relationships differ depending on the assembly accuracy of the product or the abrasion status of sealing materials. |
| 测量范围 | 10 mm0.394 in(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point. |
| 接地方法 | Capacitor grounding |
| 污染程度 | 2 |
| 热插拔功能 | Incorporated |
| 运行高度 | 2,000 m6561.68 ftor less(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| 运行指标 | Equipped (2-color LED: Orange / Green) |
| 小费偏差金额 | 35 μm1.378 mil(typical value) |
| 适用控制器 | HG-SC101(-P), HG-SC111(-P), HG-SC112(-P), HG-SC113(Note) : Be sure to use the sensor in combination with an HG-SC□ controller manufactured in or after February 2019. |
| 绝缘电阻 | 100 MΩ or more at 250 V DC |
| 监管合规 | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| 工作压力范围 | 0.14 to 0.16 MPaWith no seal cap mounted : 0.035 to 0.045 MPa |
| 指示准确度（PP） | Full range: 2.0 μm0.079 milor lessLimited range: 1.0 μm0.039 milor less(any 60 μm2.362 mil) |
| 位置检测方法 | Optical absolute linear encoder method |
| 抗压能力 | 0.2 MPa |
| 环境抵抗力：保护 | IP67 (IEC)With no seal cap mounted : -(Note) : Protective structure is not applicable when the sealing portions have deteriorated or become damaged. The protection level is zero when the seal cap is removed. |
| 环境耐受性：环境湿度 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 环境耐受性：抗冲击性 | 1,960 m/s2acceleration in X, Y, and Z directions three times each |
| 环境耐受性：环境温度 | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +60 ℃-4 to +140 ℉ |
| 环境耐受性：抗振性 | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (10 to 58 Hz), maximum acceleration 196 m/s2, (58 to 150 Hz) in X, Y, and Z directions for two hours each |
产品描述
HG-S - Contact measurement sensor. Sensor head with pneumatic actuator. Resolution 0.5μm. Precision 2μm. Range 10mm
主要特点
- 工业级品质
- 符合RoHS标准
- CE认证
- 一年保修
产品文档
数据表
技术规格和性能数据
用户手册
安装和操作指南
