现货 热销产品
UFX505PC2
UFX505PC2 FX-505P-C2 PANASONIC Fiber amplifier, PNP, analogue output, double display
$0.00
美元
库存 4168 件
主要规格
物品:
Specifications
电缆:
0.2 mm26-core cabtyre cable, 2 m6.562 ftlong
重量:
Net weight: 60 g approx.Gross weight: 100 g approx.
细节:
Cable type
供应商信息
PANASONIC
产品：4316
通常在 2-3 个工作日内发货
质量保证
快速发货
技术支援
技术规格
| 参数 | 价值 |
|---|---|
| 物品 | Specifications |
| 电缆 | 0.2 mm26-core cabtyre cable, 2 m6.562 ftlong |
| 重量 | Net weight: 60 g approx.Gross weight: 100 g approx. |
| 细节 | Cable type |
| 产品 | Digital Fiber Sensor |
| 材料 | Enclosure, Case cover: PolycarbonateSwitch: Polyacetal |
| 配饰 | FX-MB1 (Amplifier protection seal): 1 set |
| 保护 | IP40 (IEC) |
| 零件编号 | FX-505P-C2 |
| 产品名称 | Digital Fiber Sensor FX-500 Ver.2 |
| 模拟输出 | Output current: 4 to 20 mA approx. [H-SP, FAST STD: At 0 to 4,000 digits, LONG: At 0 to 8,000 digits (Note) ]Response time: 2 ms or lessZero point: Within 4 mA plus or minus 1 % F.S.Span: Within 16 mA plus or minus 5 % F.S.Linearity: Within plus or minus 3 % F.S.Load resistance: 0 to 250 Ohm(Note) If display adjustment was conducted, it is not in this range. |
| 响应时间 | H-SP: 25 micro s or lessFAST: 60 micro s or lessSTD: 250 micro s or lessLONG: 2 ms or lessU-LG: 4 ms or lessHYPR: 24 ms or less, selectable |
| 外部输入 | PNP non-contact input- Signal conditionHigh: +4 V to +V DC (at 3 mA sink current)Low: 0 to +0.6 V DC or Open- Input impedance: 10 kOhm approx. |
| 产品编号 | FX-505P-C2 |
| 供电电压 | 12 to 24 V DC+10-15 % Ripple P-P 10 % or less |
| 定时器功能 | Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffectiveIncorporated with variable OFF-delay / ON-delay /One-shot timer, switchable either effective or ineffective |
| 电缆延长线 | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC or more) |
| 各种设置 | Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc. |
| 功耗 | Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage, excluding analog output)ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage, excluding analog output) |
| 输出1，输出2 | PNP open-collector transistor- Maximum source current: 50 mA (Note 1)- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 2 V or less (Note 2) (at maximum source current)(Note 1) 50 mA max. if 5 or more standard types are connected together.(Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type) |
| 环境温度 | -10 to +55 ℉+14 to +131 ℉[If 4 to 7 units are mounted in cascade: -10 to +50 ℉+14 to +122 ℉or if 8 to 12 units are mounted in cascade: -10 to +45 ℉+14 to +113 ℉] (No dew condensation or icing allowed), Storage: -20 to +70 ℉-4 to +158 ℉ |
| 灵敏度设置 | 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment |
| 定时器功能：定时器周期 | Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx.Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx.Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx.each output is set individually |
| 发射元件（调制） | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| CE标志指令符合性 | EMC Directive, RoHS Directive |
| 排放量设定功能 | Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode] |
| 干扰抑制功能 | Incorporated (Note) , selectable either automatic interference prevention or different frequency(Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units.- Number of sensor heads mountable closely (Unit: set)Response time: IP-1H-SP: 0FAST: 2STD: 4LONG: 8U-LG: 8HYPR: 12 |
| 输出 1、输出 2：输出点 | 2 points |
| 可能的外部输入功能 | Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable |
| 输出 1、输出 2：输出操作 | Switchable either Light-ON or Dark-ON by L/D mode |
| 入射光强度显示范围 | H-SP / FAST / STD: 0 to 4,000LONG: 0 to 8,000U-LG / HYPR: 0 to 9,999 |
| 外部输入（可与输出 2 切换） | - |
| 输出 1、输出 2：短路保护 | Incorporated |
产品描述
FX-500 Amplifier F. Optical, analog output, 2 PNP outputs, dual display, high sensitivity and detection distance, ultra-fast
主要特点
- 工业级品质
- 符合RoHS标准
- CE认证
- 一年保修
产品文档
数据表
技术规格和性能数据
用户手册
安装和操作指南
