服务时间:周一至周五 9:00-18:00
UFX502 - UFX502 FX-502 PANASONIC Fiber amplifier, NPN, 2 digital output, double display, connector type
现货 热销产品

UFX502

UFX502 FX-502 PANASONIC Fiber amplifier, NPN, 2 digital output, double display, connector type

$0.00 美元
库存 4810 件
主要规格
物品: Specifications
电缆: -
重量: Net weight: 15 g approx.Gross weight: 70 g approx.
细节: 2-output type
供应商信息
PANASONIC
PANASONIC
产品:4316
通常在 2-3 个工作日内发货
质量保证
快速发货
技术支援

技术规格

参数 价值
物品 Specifications
电缆 -
重量 Net weight: 15 g approx.Gross weight: 70 g approx.
细节 2-output type
产品 Digital Fiber Sensor
材料 Enclosure, Case cover: PolycarbonateSwitch: Polyacetal
配饰 FX-MB1 (Amplifier protection seal): 1 set
保护 IP40 (IEC)
零件编号 FX-502
产品名称 Digital Fiber Sensor FX-500 Ver.2
响应时间 H-SP: 25 micro s or lessFAST: 60 micro s or lessSTD: 250 micro s or lessLONG: 2 ms or lessU-LG: 4 ms or lessHYPR: 24 ms or less, selectable
外部输入 -
产品编号 FX-502
供电电压 12 to 24 V DC+10-15 % Ripple P-P 10 % or less
定时器功能 Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffectiveIncorporated with variable OFF-delay / ON-delay /One-shot timer, switchable either effective or ineffective
电缆延长线 -
各种设置 Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc.
功耗 Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)
输出1,输出2 NPN open-collector transistor- Maximum sink current: 50 mA (Note 1)- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (Note 2) (at maximum sink current)(Note 1) 25 mA max. if 5 or more standard types are connected together.(Note 2)50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)
环境温度 -10 to +55 ℉+14 to +131 ℉[If 4 to 7 units are mounted in cascade: -10 to +50 ℉+14 to +122 ℉or if 8 to 16 units are mounted in cascade: -10 to +45 ℉+14 to +113 ℉] (No dew condensation or icing allowed), Storage: -20 to +70 ℉-4 to +158 ℉
灵敏度设置 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment
定时器功能:定时器周期 Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx.Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx.Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx.each output is set individually
发射元件(调制) Red LED (Peak emission wavelength: 643 nm0.025 mil)
CE标志指令符合性 EMC Directive, RoHS Directive
排放量设定功能 Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode]
干扰抑制功能 Incorporated (Note) , selectable either automatic interference prevention or different frequency(Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units.- Number of sensor heads mountable closely (Unit: set)Response time: IP-1H-SP: 0FAST: 2STD: 4LONG: 8U-LG: 8HYPR: 12
输出 1、输出 2:输出点 2 points
可能的外部输入功能 Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable
输出 1、输出 2:输出操作 Switchable either Light-ON or Dark-ON by L/D mode
入射光强度显示范围 H-SP / FAST / STD: 0 to 4,000LONG: 0 to 8,000U-LG / HYPR: 0 to 9,999
外部输入(可与输出 2 切换) NPN non-contact input- Signal conditionHigh: +8 V to +V DC or OpenLow: 0 to +1.2 V DC(at 0.5 mA source current)- Input impedance: 10 kOhm approx.
输出 1、输出 2:短路保护 Incorporated

产品描述

FX-500 Optical Amplifier, 2 NPN outputs, dual display, high sensitivity and detection distance, ultra-fast.
主要特点
  • 工业级品质
  • 符合RoHS标准
  • CE认证
  • 一年保修

产品文档

数据表

技术规格和性能数据

用户手册

安装和操作指南

Top