现货 热销产品
UFX501
UFX501 FX-501 PANASONIC Fiber amplifier, NPN, 1 digital output, double display, connector type
$0.00
美元
库存 4516 件
主要规格
物品:
Specifications
电缆:
-
输出:
NPN open-collector transistor- Maximum sink current: 100 mA (Note 1)- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (Note 2) (at maximum sink current)(Note 1) 50 mA max. if 5 or more standard types are connected together.(Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)
重量:
Net weight: 15 g approx.Gross weight: 70 g approx.
供应商信息
PANASONIC
产品：4316
通常在 2-3 个工作日内发货
质量保证
快速发货
技术支援
技术规格
| 参数 | 价值 |
|---|---|
| 物品 | Specifications |
| 电缆 | - |
| 输出 | NPN open-collector transistor- Maximum sink current: 100 mA (Note 1)- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (Note 2) (at maximum sink current)(Note 1) 50 mA max. if 5 or more standard types are connected together.(Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type) |
| 重量 | Net weight: 15 g approx.Gross weight: 70 g approx. |
| 细节 | Standard type |
| 产品 | Digital Fiber Sensor |
| 材料 | Enclosure, Case cover: PolycarbonateSwitch: Polyacetal |
| 配饰 | FX-MB1 (Amplifier protection seal): 1 set |
| 保护 | IP40 (IEC) |
| 零件编号 | FX-501 |
| 产品名称 | Digital Fiber Sensor FX-500 Ver.2 |
| 响应时间 | H-SP: 25 micro s or lessFAST: 60 micro s or lessSTD: 250 micro s or lessLONG: 2 ms or lessU-LG: 4 ms or lessHYPR: 24 ms or less, selectable |
| 外部输入 | - |
| 产品编号 | FX-501 |
| 供电电压 | 12 to 24 V DC+10-15 % Ripple P-P 10 % or less |
| 定时器功能 | Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffective |
| 电缆延长线 | - |
| 各种设置 | Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc. |
| 功耗 | Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage) |
| 环境温度 | -10 to +55 ℉+14 to +131 ℉[If 4 to 7 units are mounted in cascade: -10 to +50 ℉+14 to +122 ℉or if 8 to 16 units are mounted in cascade: -10 to +45 ℉+14 to +113 ℉] (No dew condensation or icing allowed), Storage: -20 to +70 ℉-4 to +158 ℉ |
| 灵敏度设置 | 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment |
| 输出：输出点 | 1 point |
| 输出：输出操作 | Switchable either Light-ON or Dark-ON by L/D mode |
| 定时器功能：定时器周期 | Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx.Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx.Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx.each output is set individually |
| 发射元件（调制） | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| CE标志指令符合性 | EMC Directive, RoHS Directive |
| 输出：短路保护 | Incorporated |
| 排放量设定功能 | Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode] |
| 干扰抑制功能 | Incorporated (Note) , selectable either automatic interference prevention or different frequency(Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units.- Number of sensor heads mountable closely (Unit: set)Response time: IP-1H-SP: 0FAST: 2STD: 4LONG: 8U-LG: 8HYPR: 12 |
| 可能的外部输入功能 | - |
| 入射光强度显示范围 | H-SP / FAST / STD: 0 to 4,000LONG: 0 to 8,000U-LG / HYPR: 0 to 9,999 |
| 外部输入（可与输出 2 切换） | - |
产品描述
FX-500 F Amplifier. Optical, NPN output, dual display, high sensitivity and detection distance, ultra-fast.
主要特点
- 工业级品质
- 符合RoHS标准
- CE认证
- 一年保修
产品文档
数据表
技术规格和性能数据
用户手册
安装和操作指南
