现货 热销产品
UFX311BP
UFX311BP FX311BP FX-311BP PANASONIC Fiber amplifier, blue LED, PNP, 12-turn potentiometer, connector type
$0.00
美元
库存 3006 件
主要规格
物品:
Specifications
输出:
PNP open-collector transistor• Maximum source current: 100 mA(50 mA, if five, or more, amplifiers are connected in cascade)• Applied voltage: 30 V DC or less (between output and +V)• Residual voltage: 1.5 V or less[at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)]
重量:
Net weight: 15 g approx., Gross weight: 20 g approx.
细节:
PNP output
供应商信息
PANASONIC
产品：4316
通常在 2-3 个工作日内发货
质量保证
快速发货
技术支援
技术规格
| 参数 | 价值 |
|---|---|
| 物品 | Specifications |
| 输出 | PNP open-collector transistor• Maximum source current: 100 mA(50 mA, if five, or more, amplifiers are connected in cascade)• Applied voltage: 30 V DC or less (between output and +V)• Residual voltage: 1.5 V or less[at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)] |
| 重量 | Net weight: 15 g approx., Gross weight: 20 g approx. |
| 细节 | PNP output |
| 产品 | Manually Set Fiber Sensor |
| 材料 | Enclosure: Heat-resistant ABS, Case cover: Polycarbonate |
| 零件编号 | FX-311BP |
| 电缆长度 | Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
| 产品名称 | Manually Set Fiber Sensor FX-311 |
| 响应时间 | 150 μs or less (FAST), 250 μs or less (STD), 2 ms or less (LONG) selectable with selection switch |
| 产品编号 | FX-311BP |
| 供电电压 | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| 定时器功能 | Incorporated with OFF-delay timer, selectable either effective (approx. 10 ms or 40 ms) or ineffective |
| 环境湿度 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 抗冲击性 | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each |
| 连接方式 | Connector(Note):The cable for amplifier connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below.Main cable (3-core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)Sub cable (1-core): CN-71-C1 (cable length 1 m 3.281 ft), CN-71-C2 (cable length 2 m 6.562 ft), CN-71-C5 (cable length 5 m 16.404 ft) |
| 功耗 | 840 mW or less (Current consumption 35 mA or less at 24 V supply voltage) |
| 环境照度 | Incandescent light: 3,000 ℓx at the light-receiving face |
| 环境温度 | -10 to +55 ℃ -14 to +131 ℉(If 4 to 7 units are connected in cascade: -10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: -10 to +45 ℃ +14 to +113 ℉) (No dew condensation or icing allowed)Storage: -20 to +70 ℃ -4 to +158 ℉ |
| 运行指标 | Orange LED (lights up when the output is ON) |
| 稳定性指标 | Green LED (lights up under stable light received condition or stable dark condition) |
| 灵敏度调节器 | 12-turn potentiometer with indicator (Pointer part: red backlight)(Note):The red backlight of the pointer part lights up more brightly when the power is turned ON and when the sensitivity is adjusted. |
| 抗振性能 | 10 to 150 Hz frequency, 0.75 mm 0.03 in amplitude in X, Y and Z directions for two hours each |
| 绝缘电阻 | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| 输出：输出操作 | Selectable either Light-ON or Dark-ON, with selection switch |
| 耐压能力 | 1,000 V AC for one min. between all supply terminals connected together and enclosure(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| 发射元件（调制） | Blue LED |
| 输出：短路保护 | Incorporated |
| 自动干扰预防功能 | Incorporated (Up to 4 sets of fiber heads can be mounted close together.)(Note):When the power supply is switched on, the emission timing are automatically set for interference prevention. |
| 发射元件（调制）：峰值发射波长 | 470 nm 0.019 mil |
产品描述
FX-311 Amplifier F. Optics, blue led, PNP, 12-24 VDC, connector
主要特点
- 工业级品质
- 符合RoHS标准
- CE认证
- 一年保修
产品文档
数据表
技术规格和性能数据
用户手册
安装和操作指南
