现货 热销产品
UFX101CC2
UFX101CC2 FX101CC2 FX-101-CC2 PANASONIC Fiber amplifier, Standard type, NPN, display, connector type, 2m cab..
$0.00
美元
库存 4205 件
主要规格
物品:
Specifications
输出:
NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 100 mA sink current)
重量:
Net weight: 15 g approx.Gross weight: 75 g approx.
细节:
Standard type [Cable set]
供应商信息
PANASONIC
产品：4316
通常在 2-3 个工作日内发货
质量保证
快速发货
技术支援
技术规格
| 参数 | 价值 |
|---|---|
| 物品 | Specifications |
| 输出 | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 100 mA sink current) |
| 重量 | Net weight: 15 g approx.Gross weight: 75 g approx. |
| 细节 | Standard type [Cable set] |
| 产品 | Digital Fiber Sensor |
| 材料 | Enclosure: PolycarbonateKey switch: PolycarbonateFiber lock lever: PBT |
| 配饰 | FC-FX-1(Protection cover): 1 pc. (Note)CN-14A-C2 (Connector attached cable, 2 m6.562 ftlong): 1 pc.(Note) Protection cover FC-FX-1 has been attached from the production at July, 2011. |
| 零件编号 | FX-101-CC2 |
| 电缆长度 | Total length up to 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| 产品名称 | Digital Fiber Sensor FX-100 |
| 响应时间 | Emission frequency 0: 250 micro s or less (factory default setting)Emission frequency 1: 450 micro s or lessEmission frequency 2: 500 micro s or lessEmission frequency 3: 600 micro s or less |
| 外部输入 | NPN non-contact input- Signal conditionHigh: +8 V to +V DC or OpenLow: 0 to +2 V DC(Source current 0.5 mA or less)- Input impedance: 10 kOhm approx. |
| 产品编号 | FX-101-CC2 |
| 供电电压 | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| 定时器功能 | ON-delay / OFF-delay timer, switchable either effective or ineffective[Timer period: 1 ms, 5 ms, 10 ms, 20 ms, 40 ms, 50 ms, 100 ms, 500 ms, 1,000 ms] |
| 数字显示 | 4 digits (green) + 4 digits (red) LCD display |
| 环境湿度 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 抗冲击性 | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |
| 连接方式 | Connector(Note) Connector attached cable CN-14A-C2 is not attached to the models that have no ''-CC2'' at the end of the model Nos.Make sure to use the optional connector attached cable CN-14A(-R)-Cx or the connector CN-14A, or a connector manufactured by J.S.T. Mfg., Ltd.(contact: SPHD-001T-P0.5, housing: PAP-04V-S). |
| 功耗 | Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage) |
| 环境照度 | Incandescent light: 3,000 lx or less at the light-receiving face |
| 环境温度 | –10 to +55 ℃+14 to +131℉(If 4 to 7 units are mounted close together: –10 to +50 ℃+14 to +122℉, if 8 to 16 units are mounted close together: –10 to +45 ℃+14 to +113℉) (No dew condensation or icing allowed),Storage: –20 to +70 ℃–4 to +158℉ |
| 运行指标 | Orange LED (lights up when the output is ON) |
| 灵敏度设置 | 2-point teaching / Limit teaching / Full-auto teaching |
| 抗振性能 | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| 绝缘电阻 | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| 输出：输出操作 | Selectable either Light-ON or Dark-ON, at SET mode |
| 耐压能力 | 1,000 V AC for one min. between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| 发射元件（调制） | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| CE标志指令符合性 | EMC Directive, RoHS Directive |
| 输出：短路保护 | Incorporated |
| 排放量设定功能 | 3-level + Auto setting (from production in December 2007) |
| 干扰抑制功能 | Incorporated Emission frequency selection method (Functions at emission frequency 1, 2 or 3)(Note) When using the interference prevention function, set the emission frequencies for the amplifiers to be covered by the interference prevention function to different frequency values.However, the interference prevention function does not operate at emission frequency 0 (factory default setting). |
| 精细灵敏度调节功能 | Incorporated |
产品描述
FX100 Amplifier F. Optical, NPN output, includes cable CN14AC2
主要特点
- 工业级品质
- 符合RoHS标准
- CE认证
- 一年保修
产品文档
数据表
技术规格和性能数据
用户手册
安装和操作指南
