现货 热销产品
UFM2548P
UFM2548P FM-254-8-P PANASONIC flow sensor FM200, 50l/minø8,PNP
$0.00
美元
库存 4320 件
主要规格
物品:
Specifications
重量:
Net weight:70 g approx., Gross weight: 135 g approx.
细节:
Resin body type
展示:
4 digits + 4 digits 2-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation)
供应商信息
PANASONIC
产品：4316
通常在 2-3 个工作日内发货
质量保证
快速发货
技术支援
技术规格
| 参数 | 价值 |
|---|---|
| 物品 | Specifications |
| 重量 | Net weight:70 g approx., Gross weight: 135 g approx. |
| 细节 | Resin body type |
| 展示 | 4 digits + 4 digits 2-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation) |
| 产品 | Integrated Display Type Digital Flow Sensor |
| 材料 | Enclosure: ABS, Body: Polyamide (Aluminum body type: Aluminum), Switch: EPDM, Display: Acrylic, Mounting screw part (Resin body type): Brass Current plate / Port filter: Stainless steel (used for the gas contact area), Sensor chip: Silicon, Gasket: Fluorine rubber |
| 线性 | Within ±3 % F.S. (Ambient temperature +25 ℃ +77 ℉, flow rate range 3 to 100 % F.S., atmospheric criteria on secondary side) |
| 端口尺寸 | ø8 ø0.315 push-in |
| 保护 | IP40 (IEC) |
| 配件 | CN-F15-C1 (Connector attached cable 1 m 3.281 ft): 1 pc. |
| 零件编号 | FM-254-8-P |
| 电缆长度 | Total length up to 10 m 32.808 ft is possible with 0.3 mm2, or more, cable. |
| 产品名称 | Integrated Display Type Digital Flow Sensor FM-200(Discontinued) |
| 重复性 | Within ±1 % F.S. |
| 外部输入 | ON voltage: +5 V to +VOFF voltage: 0 to +0.6 V, or openInput time: 80 ms or more |
| 产品编号 | FM-254-8-P |
| 供电电压 | 12 to 24 V DC ± 10 % Ripple P-P10 % or less |
| 环境湿度 | 35 to 90 % RH, Storage: 35 to 90 % RH |
| 适用液体 | Clean air, compressed air, nitrogen gas(Note):The clean air complies with JIS B 8392-1.1.1 to 5.6.2, and the compressed air complies with JIS B 8392-1.1.1 to 1.6.2. |
| 抗冲击性 | 100 m/s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| 连接方式 | Connector |
| 比较产出 | PNP open-collector transistor・Maximum source current: 50 m A or less・Applied voltage: 26.4 V DC or less(between comparative output and +V)・Residual voltage: 2.4 V or less (at 50 mA source current) |
| 外壳接地 | Floating(Note):As a varistor (clamping voltage: approx. 40 V) is connected to the aluminum body type, do not apply voltage higher than the rated voltage of the sensor. |
| 环境温度 | 0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage: -10 to +60 ℃ +14 to +140 ℉ |
| 当前消耗 | Normal mode: 60 mA or less, ECO mode: 40 mA or less |
| 满量程流量 | 50 ℓ/min.(Note):Converted to volumetric flow at +20 ℃ +68 ℉ and 1 atmospheric pressure (101 kPa). |
| 额定压力范围 | -0.09 to +0.7 MPa |
| 抗振性能 | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude or 49 m/s2max. acceleration, in X, Y and Z directions for two hours each |
| 模拟电压输出 | Output voltage: 1 to 5 V, Output impedance: 1 kΩ approx.[Refer to "Analog voltage output" for more details.] |
| 绝缘电阻 | 10 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure (Excluding the aluminum body type) |
| 精度保证范围 | Bi-direction : -100 to -3 % F.S., +3 to +100 % F.S.One-side direction : +3 to +100 % F.S.(Note):Take care that if fluid flows in the vicinity of zero-point which is out of the accuracy assurance range, the instant flow rate value may forcibly display "zero", or the integrated flow display value may not be counted up, or the integrated pulse output may not be outputted. |
| 压力特性 | Within ±5 % F.S. (-0.09 to +0.7 MPa, +25 ℃ +77 ℉, atmospheric criteria on secondary side) |
| 耐压能力 | 1 MPa |
| 指定积分值 | 0.5 ℓ |
| 温度特性 | Within ±0.2 % F.S./℃ (+25 ℃ +77 ℉ criteria, +15 to +35 ℃ +59 to +95 ℉ ambient temperature range) |
| 对比输出：滞后 | Window comparator mode: 1 to 8 % F.S. approx. (variable) (Factory settings: approx. 1 % F.S.), Hysteresis mode: Variable (minimum 1 digit) |
| 比较输出：输出模式 | Output OFF mode, window comparator mode, hysteresis mode, integrated output mode, integrated pulse output mode |
| 瞬时流量：显示范围 | -55 to +55 ℓ/min.(Note):The display flow rate range is the case when setting to bi-direction at the flow direction setting. When the flow direction is set to one-side forward direction or one-side reverse direction, the negative side of the display flow rate range shows 10 % of the full-scale (F.S.). |
| 对比输出：响应时间 | 50 ms, 80 ms, 120 ms, 200 ms, 400 ms, 800 ms, 1,500 ms, selectable by key operation |
| 集成流量：显示范围 | ±999999.9 ℓ(Note):The display flow rate range is the case when setting to bi-direction at the flow direction setting. When the flow direction is set to one-side forward direction or one-side reverse direction, the negative side of the display flow rate range shows 10 % of the full-scale (F.S.). |
| 对比输出：短路保护 | Incorporated |
| 瞬时流量：设置和显示分辨率 | 0.1 ℓ/min. |
| 集成流量：设置和显示分辨率 | 0.1 ℓ |
产品描述
Air flow meter, 50l/min, PNP
主要特点
- 工业级品质
- 符合RoHS标准
- CE认证
- 一年保修
产品文档
数据表
技术规格和性能数据
用户手册
安装和操作指南
