| 参数 | 价值 |
|---|---|
| 物品 | Specifications |
| 评论 | (Note:)measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20℃ +68℉. |
| 重量 | Net weight: 30 g approx., Gross weight: 95 g approx. |
| 细节 | M12 connector type |
| 展示 | 4 digits + 4 digits 3-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation) |
| 产品 | Dual Display Digital Pressure Sensor [For Gas] |
| 材料 | Enclosure: PBT (glass fiber reinforced), LCD display: Acrylic, Pressure port: Stainless steel (SUS303) , Mounting threaded part: Brass (nickel plated), Switch part: Silicone rubber |
| 保护 | IP40(IEC) |
| 配件 | Dedicated M12 connector cable, 0.3 m0.984 ftlong: 1 pc. |
| 零件编号 | DP-102ZL3-M-P-C |
| 电缆长度 | Total length up to 20 m65.617 ft(Condition of CE compliance less than 20 m65.617 ft)is possible with 0.3 mm2, or more, cable. |
| 产品名称 | Dual Display Digital Pressure Sensor [For Gas] DP-100L |
| 压力端口 | M5 female thread |
| 产品编号 | DP-102ZL3-M-P-C |
| 供电电压 | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| 环境湿度 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 适用液体 | Non-corrosive gas |
| 输出指标 | Orange LED(Output operation indicator 1: Flashes during IO-Link communication, Lights up when the control output is ON during non-IO-Link communication (synchronized with the output operation indicator 2)Output operation indicator 2: Lights up when the control output is ON) |
| 抗冲击性 | 100 m/s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| 压力类型 | Gauge pressure |
| 连接方式 | Connector |
| 功耗 | Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)ECO mode: 480 mW or less at STD (Current consumption 20 mA or less at 24 V supply voltage)360 mW or less at FULL (Current consumption 15 mA or less at 24 V supply voltage) |
| 设定压力范围 | -0.101 to +1.010MPa |
| 环境温度 | -10 to +50℃+14 to +122 ℉(No dew condensation or icing allowed), Storage: -10 to +60℃+14 to +140 ℉ |
| 控制输出(DO) | PNP open-collector transistor•Maximum source current: 50 mA• Applied voltage: 30 V DC or less (between output and +V)• Residual voltage: 2 V or less (at 50 mA source current) |
| 额定压力范围 | -0.100 to +1.000 Mpa |
| 抗振性能 | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude or maximum acceleration 196 m/s2, in X, Y and Z directions for two hours each(when panel or flat attachment is mounted: 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each) |
| 绝缘电阻 | 50 MΩ or more with 500 V DC megger between all supply terminals connected together and enclosure |
| 耐压能力 | 1.5MPa |
| 温度特性 | Within ±1 % F.S.(at +20℃+68℉) |
| 控制输出(DO):滞后 | Minimum 1 digit (variable) |
| 控制输出(DO):重复性 | ±0.2 % F.S. (within ±2 digits) |
| 控制输出(DO):响应时间 | 2.5 ms, 5 ms, 10 ms, 25 ms, 50 ms, 100 ms, 250 ms, 500 ms, 1,000 ms, 5,000 ms, selectable by key operation |
| 显示:可显示的压力范围 | -0.101 to +1.010MPa |
| 通信输出(C/Q):波特率 | COM3 (230.4 kbps)(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO). |
| 控制输出(DO):输出操作 | N.O./N.C. (selectable by key operation) |
| 通信输出(C/Q):过程数据 | 4 byte(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO). |
| 监管合规性和认证 | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL/c-UL Certification |
| 控制输出(DO):短路保护 | Incorporated |
| 通信输出(C/Q):最小周期时间 | 1.0ms(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO). |
| 通信输出(C/Q):IO-Link 通信 | IO-Link Specification V1.1(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO). |
| 控制输出(DO):输出操作/输出模式 | EASY mode / Hysteresis mode / Window comparator mode |
技术规格和性能数据
安装和操作指南