现货 热销产品
UBEA401
UBEA401 BE-A401 PANASONIC Optical Bubble Sensor for 4mm tube (NPN)
$0.00
美元
库存 3270 件
主要规格
物品:
Specifications
电缆:
0.09 mm24-core cabtyre cable 1 m3.280 ft
重量:
Net weight: 15 g approx., Gross weight: 25 g approx.
细节:
for ø4 mmø0.156 intube
供应商信息
PANASONIC
产品：4316
通常在 2-3 个工作日内发货
质量保证
快速发货
技术支援
技术规格
| 参数 | 价值 |
|---|---|
| 物品 | Specifications |
| 电缆 | 0.09 mm24-core cabtyre cable 1 m3.280 ft |
| 重量 | Net weight: 15 g approx., Gross weight: 25 g approx. |
| 细节 | for ø4 mmø0.156 intube |
| 产品 | For small diameter tubes Optical Bubble Sensor |
| 材料 | Enclosure: PBT, Tube holder: Polyamide, Indicator: Polycarbonate |
| 零件编号 | BE-A401 |
| 产品名称 | For small diameter tubes Optical Bubble Sensor BE-A |
| 产品编号 | BE-A401 |
| 感知对象 | Liquid(Note) Sensing is affected by dirt or residues adhered to the inner wall of the tube. Please maintain the tube regularly. |
| 供电电压 | 5 to 24 V DC ±10 % Ripple P-P 10 % or less |
| 电缆延长线 | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable.(Note)Confirm that the power supply voltage at the end of cable is more than 4.5 V when using an extension of over 20 m65.167 ft. |
| 夹紧扭矩 | 0.5N•m or less |
| 发射极 | Infrared LED(Peak emission wavelength: 855 nm0.034 mil, non-modulated) |
| 可检测的空气间隙 | 0.8 mm0.032 inor more(Note) Sensing air gap refers to the width of an air bubble formed in the entire area of the inner diameter of the tube. Please note that this product cannot sense very small air bubbles or water drops. |
| 当前消耗 | 15 mA or less |
| 运行指标 | Orange LED (lights up with absent liquid) |
| 保护电路 | Power supply reverse polarity protection , Output reverse polarity protection |
| 适用管型 | Transparent resin tube (equivalent to flexible PVC)(Note) When using a tube out of specifications or it doesn't have a smooth surface, please test sensing on the actual machine before use. |
| 合规监管 | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| 适用管径（外径×内径） | ø4 mm × ø2.4 mmø5/32 in × ø3/32 in(Note) When using a tube out of specifications or it doesn't have a smooth surface, please test sensing on the actual machine before use. |
| 响应时间：检测到气泡时 | 20 μs or less(Note) Actual response time may differ from specification (typical example using applicable tube) due to dimension, light transmission or surface state of test tube in use. |
| 响应时间：检测液体时 | 80 μs or less(Note) Actual response time may differ from specification (typical example using applicable tube) due to dimension, light transmission or surface state of test tube in use. |
| 输出（包含 2 个输出） | NPN open-collector transistor•Maximum sink current: 50 mA•Applied voltage: 30 V DC or less (between output and 0 V)•Residual voltage: 2 V or less (sink current at 50 mA) 1 V or less (sink current at 16 mA) |
| 环境抵抗力：保护 | IP40 (IEC) |
| 环境耐受性：环境湿度 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 环境耐受性：抗冲击性 | 100 m/s2acceleration in X, Y, and Z directions three times each |
| 环境耐受性：环境光照度 | Fluorescent light: 1,000 ℓx at the light-receiving face |
| 环境耐受性：环境温度 | -25 to +55 ℃-13 to +131 ℉(No dew condensation or icing allowed), Storage: -30 to +80 ℃-22 to +176 ℉(Note) Liquid being detected should also be kept within the rated ambient temperature range. |
| 环境耐受性：抗振性 | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each |
| 环境耐受性：绝缘阻力 | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| 环境耐受性：耐压能力 | 1,000 V AC for between one min. between all supply terminals connected together and enclosure |
| 输出（包含 2 个输出）：输出操作 | Switchable either Liquid-absent-ON or Liquid-present-ON |
| 输出（包含 2 个输出）：短路保护 | Incorporated |
产品描述
Optical sensor for bubble detection in 4mm transparent probes and tubes, NPN digital output
主要特点
- 工业级品质
- 符合RoHS标准
- CE认证
- 一年保修
产品文档
数据表
技术规格和性能数据
用户手册
安装和操作指南
