| 参数 | 价值 |
|---|---|
| 900 MHz (LTE B8) | |
| LTE | CAT3 |
| MTTF | 532 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| 深度 | 114 mm |
| 输入 | ± 2.2 kV (Test Level 3) |
| 宽度 | 45 mm |
| 高度 | ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) |
| 信号 | Ethernet |
| 天线 | 50 Ω impedance SMA antenna socket |
| 路由 | Standard routing |
| 电压 | 10 V |
| 评论 | Criterion B |
| EMC 说明 | EMC: class A product, see manufacturer's declaration in the download area |
| 数据速率 | ≤ 100 Mbps (LTE, DL) |
| 过滤 | MAC addresses |
| 电源型 | Cellular communication |
| 管理 | Web-based management, SNMP |
| Web服务器 | yes |
| 应用 | Ethernet |
| 证书 | CE-compliant |
| 标准 A | Normal operating behavior within the specified limits. |
| 标准 B | Temporary impairment to operational behavior that is corrected by the device itself. |
| 输出名称 | Digital output |
| 产品类型 | Security router for the DIN rail |
| 安装类型 | DIN rail mounting |
| 网络检查 | LED bar graph to display receive quality |
| SIM卡接口 | 1.8 volt, 3 volt |
| 验证 | X.509v3 certificates with RSA or PSK |
| 数据完整性 | MD5 |
| 防火墙规则 | Configurable stateful inspection firewall with full scope of functions |
| 鉴别 | ISA-S71.04-1985 G3 Harsh Group A |
| 基本功能 | Router with intelligent firewall and VPN for 10 tunnels (up to 250 supported with optional additional license), CIFS Integrity Monitoring (as an option), metal housing, slot for SD memory card |
| 国家支持 | Europe |
| 场强 | 10 V/m |
| 频率范围 | 800 MHz (LTE B20) |
| 频道数量 | 6 |
| 文章修订 | 07 |
| 空气排放 | ± 8 kV (Test Level 3) |
| 输入数量 | 3 |
| 剥皮长度 | 7.00 mm |
| 连接方式 | RJ45 |
| 接触放电 | ± 6 kV (Test Level 3) |
| 输出数量 | 3 |
| 拧紧扭矩 | 0.56 Nm ... 0.79 Nm |
| 加密方法 | DES, 3DES, AES-128, -192, -256 |
| 文件格式/编码 | UART/NRZ: 8 Data, 1/2 Stop, None/Even/Odd Parity |
| 材料(房屋) | Metal |
| 防止 | IP spoofing, DoS and Syn Flood Protection |
| 支持的浏览器 | HTTPS support required |
| 传动速度 | 10/100 Mbps (auto negotiation) |
| 辅助协议 | ARP, DHCP, PING (ICMP), SNMP V1, SMTP |
| 污染程度 | 2 |
| 申请须知 | Only for industrial use |
| 支持的协议 | TCP/IP, UDP/IP, FTP, HTTP |
| 传输长度 | 100 m (shielded twisted pair) |
| 当前输入信号 | 5 mA |
| 保护程度 | IP20 |
| 电气隔离 | VCC // PE |
| 供电电压范围 | 11 V DC ... 36 V DC (via pluggable COMBICON screw terminal block) |
| 电压输入信号 | 10 V DC ... 30 V DC |
| 当前输出信号 | ≤ 125 mA (Short-circuit-proof) |
| 接口描述 | GSM / GPRS / EDGE / UMTS / HSPA / LTE (FDD) |
| VPN隧道数量 | 10 (up to 250 tunnels with additional license as an option) |
| 远程系统日志记录 | on externals server |
| 标准/法规 | EN 61000-4-2 |
| 电压输出信号 | 10 V DC ... 30 V DC (depending on the operating voltage) |
| 输入描述 | Digital input |
| 防火墙数据吞吐量 | max. 124 Mbps (Router mode, default firewall rules, bidirectional throughput) |
| 最大电流消耗 | < 1.8 A (at 11 V DC (incl. 3 x 125 mA for the outputs)) |
| 天线连接方式 | SMA (female) |
| 串行传输速度 | 9.6; 19.2; 38.4; 57.6; 115.2 kbps |
| 数据流控制/协议 | Software handshake, Xon/Xoff or hardware handshake RTS/CTS |
| 典型电流消耗 | < 320 mA (24 V DC) |
| 电磁兼容性 | Conformance with EMC Directive 2014/30/EU |
| 环境温度(运行) | -40 °C ... 60 °C |
| 允许湿度(运行) | 5 % ... 95 % (non-condensing) |
| 网络时间协议 (NTP) 客户端 | Client |
| 链路层发现协议(LLDP) | As per protocol 802.2 |
| 单线/接线端子,柔性 | 0.2 mm² ... 2.5 mm² |
| 单导体/接线端子,刚性 | 0.2 mm² ... 2.5 mm² |
| 环境温度(储存/运输) | -40 °C ... 70 °C |
| 柔性导体横截面 [AWG] | 24 ... 14 |
| 互联网协议安全 (IPsec) 模式 | ESP tunnel / ESP transport |
| 测试电压数据接口/电源 | 1 kV (50 Hz, 1 min.) |
| 虚拟专用网络 (VPN) 吞吐量 | max. 40 Mbps (Router) |
| 测试电压数据接口/数据接口 | 1 kV (50 Hz, 1 min.) |
| 额定工况下的最大功率耗散 | 7.68 W |
| VPN中的1:1网络地址转换(NAT) | supported |
| 发射的无线电干扰符合 EN 55011 标准 | EN 55011 class A industrial area of application |
| 符合 EN 55011 标准的无线电干扰电压 | EN 55011 class A industrial area of application |
| 支持动态主机配置协议 (DHCP) | Server or Relay Agent |
| 不含可能影响涂层应用的物质 | VDMA 24364:2018-05 |
| 导体横截面,柔性,带套圈,带塑料套管 | 0.25 mm² ... 2.5 mm² |
| 导体横截面柔性,带套圈,无塑料套管 | 0.25 mm² ... 2.5 mm² |
技术规格和性能数据
安装和操作指南