| 参数 | 价值 |
|---|---|
| 230 V DC | |
| 宽度 | 16 mm |
| 高度 | 27.5 mm |
| 长度 | 26.8 mm |
| 屏蔽 | no |
| 头部设计 | Valve connector |
| 传感器类型 | Universal |
| 产品类型 | Valve connectors |
| 组装说明 | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| 固定螺丝 | M2,5 x 27 |
| 密封材料 | NBR |
| 状态显示 | LED (yellow) |
| 文章修订 | 02 |
| 联系材料 | CuZn |
| 头部螺纹类型 | C (8 mm) |
| 外径 | 4 mm ... 6 mm |
| 连接方式 | Screw connection |
| 拧紧扭矩 | 1.6 Nm ±0.2 Nm (Pressure screw) |
| 接触电阻 | ≤ 4 mΩ |
| 额定电流 IN | 1.5 A |
| 标称电压 UN | 230 V AC |
| 保护电路 | Surge protection; Varistor |
| 污染程度 | 3 |
| 尺寸图 | |
| 职位数量 | 3 |
| PG螺纹连接 | M12 |
| 保护程度 | IP65 |
| 电缆插座数量 | 1 |
| 过电压类别 | II |
| 标准名称 | Valve connector |
| 绝缘电阻 | > 2 GΩ |
| 状态显示存在 | Yes |
| 导体横截面 | 0.25 mm² ... 0.5 mm² |
| 接触面材料 | CuSn |
| 标准/规范 | EN 175301-803 |
| 插入/拔出周期 | 50 (Valve connector) |
| 材料外壳阀塞 | PA |
| 连接横截面 AWG | 24 ... 20 |
| 环境温度(运行) | -25 °C ... 60 °C (valve plug) |
| 根据 UL 94 标准评定的阻燃等级 | HB |
技术规格和性能数据
安装和操作指南