| 参数 | 价值 |
|---|---|
| 30 V DC | |
| 笔记 | In line with |
| 编码 | A |
| 长度 | 44 mm |
| 一般的 | NOTE:Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
| 屏蔽 | yes |
| 头部设计 | Plug |
| 传感器类型 | Universal |
| 电缆插座 | straight |
| 产品类型 | Circular connector (cable-side) |
| 密封材料 | NBR |
| 直径外壳 | 22 mm |
| 头部螺纹类型 | M12 |
| 外径 | 4.5 mm ... 7.5 mm |
| 连接方式 | Crimp connection |
| 头部电缆出口 | straight |
| 头部锁定型 | Push-Pull |
| 拧紧扭矩 | 4 Nm (Pressure nut with coupling sleeve) |
| 额定电流 IN | 2 A |
| 标称电压 UN | 30 V AC |
| 污染程度 | 3 |
| 尺寸图 | |
| 职位数量 | 8 |
| 额定浪涌电压 | 0.8 kV |
| 保护程度 | IP65 |
| 电缆插座数量 | 1 |
| 过电压类别 | II |
| 信号类型/类别 | Universal |
| 标准名称 | M12 connector |
| 组装说明 | Contacts can be clipped in place and unclipped without tools |
| 绝缘电阻 | ≥ 100 MΩ |
| 握把主体材质 | Zinc die-cast, nickel-plated |
| 扳手尺寸,连接螺母 | 15 mm |
| 连接横截面 | 0.14 mm² ... 0.34 mm² (flexible) |
| 标准/规范 | IEC 61076-2-101 |
| 扳手尺寸,锁紧螺母 | 14 mm |
| 插入/拔出周期 | ≥ 100 |
| 连接横截面 AWG | 26 ... 22 (flexible) |
| 螺纹连接材料 | PA 6.6 |
| 环境温度(运行) | -40 °C ... 85 °C (Plug / socket) |
| 根据 UL 94 标准评定的阻燃等级 | V0 |
| 单根导线的剥线长度 | 4 mm +0,5 mm |
技术规格和性能数据
安装和操作指南