现货 热销产品
SACC-M12MR-4CON-PG11-M PWR
SACC-M12MR-4CON-PG11-M PWR 1408990 PHOENIX CONTACT Power connectors
$0.00
美元
库存 4659 件
主要规格
:
0.75 mm² ... 1.5 mm² (with ferrule)
编码:
A
长度:
44 mm
一般的:
Strip 22 mm off the cable sheath, strip 7 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Length of conductor with shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm.
供应商信息
产品：0
通常在 2-3 个工作日内发货
质量保证
快速发货
技术支援
技术规格
| 参数 | 价值 |
|---|---|
| 0.75 mm² ... 1.5 mm² (with ferrule) | |
| 编码 | A |
| 长度 | 44 mm |
| 一般的 | Strip 22 mm off the cable sheath, strip 7 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Length of conductor with shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm. |
| 屏蔽 | no |
| 应用 | Power supply |
| 头部设计 | Plug |
| 电缆插座 | angled |
| 产品类型 | Circular connector (cable-side) |
| 组装说明 | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| 密封材料 | NBR |
| 文章修订 | 00 |
| 联系材料 | CuZn |
| 直径外壳 | 20.2 mm |
| 头部螺纹类型 | M12 |
| 外径 | 8 mm ... 10 mm |
| 连接方式 | Screw connection |
| 头部电缆出口 | angled |
| 拧紧扭矩 | 0.4 Nm (M12 knurl) |
| 接触电阻 | ≤ 3 mΩ |
| 额定电流 IN | 8 A (when using 1.5 mm² conductors) |
| 标称电压 UN | 250 V AC |
| 污染程度 | 3 |
| 尺寸图 | |
| 职位数量 | 4 |
| PG螺纹连接 | Pg11 |
| 额定浪涌电压 | 2.5 kV |
| 保护程度 | IP67 |
| 电缆插座数量 | 1 |
| 过电压类别 | II |
| 标准名称 | M12 connector |
| 绝缘电阻 | > 10 GΩ |
| 握把主体材质 | PA |
| 连接横截面 | 0.75 mm² ... 1.5 mm² (without ferrule) |
| 接触载体材料 | PA |
| 接触面材料 | Ni/Au |
| 标准/规范 | IEC 61076-2-101 |
| 插入/拔出周期 | > 100 |
| 连接横截面 AWG | 18 ... 16 (without ferrule) |
| 螺纹连接材料 | Zinc die-cast, nickel-plated |
| 环境温度（运行） | -40 °C ... 85 °C (Plug / socket) |
| 根据 UL 94 标准评定的阻燃等级 | V0 |
| 单根导线的剥线长度 | 5 mm |
产品描述
Power connector, 4-pole, M12 angled male connector, A-coded, Screw connection, knurling material: Zinc die-cast, nickel-plated, Pg11 cable gland, cable diameter 8 mm ... 10 mm
主要特点
- 工业级品质
- 符合RoHS标准
- CE认证
- 一年保修
产品文档
数据表
技术规格和性能数据
用户手册
安装和操作指南
