| 参数 | 价值 |
|---|---|
| PBT | |
| 编码 | A |
| 一般的 | NOTE:Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
| 材料 | Die-cast zinc |
| 屏蔽 | no |
| 电缆类型 | PUR/PVC black |
| 应用 | Standard |
| 电缆长度 | 40 m |
| 电缆重量 | 96.6 kg/km |
| 产品类型 | Distributor boxes with M8 to M12 slots |
| 简称 | LiYY11Y-HF |
| UL AWM 型 | 20549 |
| 整体转折 | Wires twisted in layers |
| 密封材料 | NBR |
| 弯曲半径 | 80 mm |
| AWG信号线 | 22 |
| 插槽数量 | 6 |
| 穿越路径 | 2 m |
| 遍历速率 | 2 m/s |
| AWG电源 | 18 |
| 联系材料 | Cu alloy |
| 阻燃性 | DIN EN 50265 |
| 其他阻力 | Highly resistant to acids, alkaline solutions and solvents |
| 连接方式 | Fixed connection |
| 耐油性 | according to VDE 0472 Part 803 |
| 导体材料 | Bare Cu litz wires |
| 标称电压 UN | 120 V AC |
| 单线,彩色 | brown, blue, green/yellow, white, green, yellow, gray, pink, red |
| 特殊属性 | Silicone-free |
| 尺寸图 | |
| 职位数量 | 4 |
| 测试电压,电缆 | 2000 V |
| 保护程度 | IP65 |
| 额定电流,总 | 12 A |
| 标准名称 | M12 connector |
| 厚度、绝缘 | ≥ 0.15 mm (Inner sheath) |
| 外层护套,颜色 | black RAL 9005 |
| 材料,内鞘 | PVC |
| 标称电压,电缆 | 300 V |
| 外层护套,材料 | PUR |
| 状态显示存在 | No |
| 导体横截面 | 6x 0.34 mm² (Signal line) |
| 电缆外径 | 8 mm ±0.2 mm |
| 接触载体材料 | PA |
| 接触面材料 | gold-plated |
| 材料线绝缘 | PVC |
| 弯曲循环次数 | 1500000 |
| 标准/规范 | IEC 61076-2-101 |
| 电缆类型(缩写) | PUR |
| 最大工作电压 Umax | 135 V |
| 含绝缘层的线径 | 1.3 mm ±0.1 mm (Signal line) |
| 环境温度(运行) | -5 °C ... 80 °C (Cable, flexible installation) |
| 导体结构信号线 | 19x 0.15 mm |
| 每个插槽的电流承载能力 | 4 A |
| 导体结构,电压供应 | 42x 0.15 mm |
| 根据 UL 94 标准评定的阻燃等级 | V0 |
| 每条路径的最大载流能力 | 2 A |
| 最小弯曲半径,固定安装 | 7.5 x D |
| 最小弯曲半径,安装灵活 | 10 x D |
技术规格和性能数据
安装和操作指南