| 参数 | 价值 |
|---|---|
| 120 V DC | |
| 引领 | no |
| 宽度 | 54 mm |
| 编码 | A |
| 高度 | 23 mm |
| 长度 | 117 mm |
| 屏蔽 | no |
| 电缆类型 | PUR/PVC black [PUR] |
| 应用 | Standard |
| 电缆长度 | 10 m |
| 电缆重量 | 122 kg/km |
| 产品类型 | Distributor box |
| 测试电压 | 2000 V |
| UL AWM 型 | 20549 |
| 组装说明 | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| 整体转折 | Wires twisted in layers |
| AWG信号线 | 20 |
| 插槽数量 | 4 |
| 联系材料 | Cu alloy |
| 阻燃性 | DIN EN 50265 |
| 材料房屋 | PBT |
| 其他阻力 | Highly resistant to acids, alkaline solutions and solvents |
| 耐油性 | according to VDE 0472 Part 803 |
| 导体材料 | Bare Cu litz wires |
| 标称电压 UN | 120 V AC |
| 单线,彩色 | brown, blue, green/yellow, white, green, yellow, gray, gray/pink, red/blue, white/green, brown/green |
| 特殊属性 | Silicone-free |
| 尺寸图 | |
| 申请须知 | Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories". |
| 职位数量 | 5 |
| 保护程度 | IP65 |
| 额定电流,总 | 12 A |
| 密封材料 O 形圈 | NBR |
| 标准名称 | M12 connector |
| 外层护套,颜色 | black RAL 9005 |
| 内鞘厚度 | ≥ 0.15 mm |
| 标称电压,电缆 | 300 V |
| 外层护套,材料 | PUR |
| 状态显示存在 | No |
| 导体横截面 | 8x 0.5 mm² (Signal line) |
| 电缆外径 | 8.70 mm ±0.2 mm |
| 厚度,外鞘 | ≥ 0.38 mm |
| 接触载体材料 | PA |
| 接触面材料 | gold-plated |
| 材质:螺纹套筒 | PBT |
| 材料线绝缘 | PVC |
| 标准/规范 | IEC 61076-2-101 |
| 模塑料 | PUR |
| 含绝缘层的线径 | 1.5 mm ±0.1 mm (Signal line) |
| 环境温度(运行) | -40 °C ... 90 °C (cable, fixed installation) |
| 导体结构信号线 | 28x 0.15 mm |
| 动态承载能力(弯曲) | Max. bending cycles: 1500000, Bending radius: 87 mm, Traversing path: 2 m, Traversing rate: 2 m/s |
| 传感器/执行器连接系统 | M12-SPEEDCON-socket |
| 每个插槽的电流承载能力 | 4 A |
| 根据 UL 94 标准评定的阻燃等级 | V0 |
| 每条路径的最大载流能力 | 2 A |
| 插槽/位置 = 电线颜色或连接方式 | 1 / 4 (A) = WH |
| 最小弯曲半径,固定安装 | 66 mm |
| 拧紧扭矩槽传感器/执行器电缆 | 0.4 Nm |
| 最小弯曲半径,安装灵活 | 10 x D |
| 最小弯曲半径,可移动安装 | 87 mm |
| 用于固定外壳的安装螺钉的拧紧扭矩 | 0.5 Nm |
技术规格和性能数据
安装和操作指南