现货 热销产品
RBO 6
RBO 6 3075896 PHOENIX CONTACT Bolt connection terminal block
$2.32
美元
库存 4357 件
主要规格
:
The rated insulation voltage applies to insulated cable lugs acc. DIN 46237:1970-07 and for uninsulated cable lugs acc. DIN 46234:1980-03 with shrink sleeve. When using uninsulated cable lugs with shrink sleeve the min. required air clearances and creepage distances have to be ensured by the enduser.
笔记:
The rated insulation voltage applies to insulated cable lugs acc. DIN 46237:1970-07 and for uninsulated cable lugs acc. DIN 46234:1980-03 with shrink sleeve.
颜色:
gray (RAL 7042)
沥青:
17 mm
供应商信息
产品：0
通常在 2-3 个工作日内发货
质量保证
快速发货
技术支援
技术规格
| 参数 | 价值 |
|---|---|
| The rated insulation voltage applies to insulated cable lugs acc. DIN 46237:1970-07 and for uninsulated cable lugs acc. DIN 46234:1980-03 with shrink sleeve. When using uninsulated cable lugs with shrink sleeve the min. required air clearances and creepage distances have to be ensured by the enduser. | |
| 笔记 | The rated insulation voltage applies to insulated cable lugs acc. DIN 46237:1970-07 and for uninsulated cable lugs acc. DIN 46234:1980-03 with shrink sleeve. |
| 颜色 | gray (RAL 7042) |
| 沥青 | 17 mm |
| 宽度 | 15 mm |
| 高度 | 80.8 mm |
| 结果 | Test passed |
| 光谱 | Service life test category 2, bogie-mounted |
| ASD 水平 | 6.12 (m/s²)²/Hz |
| 频率 | f1= 5 Hz to f2= 250 Hz |
| 潜力 | 1 |
| 脉冲形状 | Half-sine |
| 加速度 | 3.12g |
| 产品类型 | Bolt connection terminal block |
| 螺纹 | M6 |
| 螺栓直径 | 6 mm |
| 横截面 | 6 mm² ... 35 mm² |
| 孔径 | 6.5 mm |
| 安装类型 | NS 35/7,5 |
| 规格 | DIN EN 50155 (VDE 0115-200):2018-05 |
| 行数 | 1 |
| 产品系列 | RBO |
| 冲击持续时间 | 30 ms |
| 附加文本 | only use with shrink sleeve |
| NS 32 深度 | 54.8 mm |
| 端盖宽度 | 2.2 mm |
| 额定电流 | 125 A |
| 标称电压 | 800 V |
| 打开侧面板 | No |
| 测试说明 | X-, Y- and Z-axis |
| 文章修订 | 01 |
| 剥皮长度 | The stripping length depends on the specification provided by the cable lug manufacturer. |
| 曝光时间 | 30 s |
| 拧紧扭矩 | 3.2 ... 3.7 Nm |
| NS 35/15 深度 | 57.3 mm |
| 污染程度 | 3 |
| NS 35/7.5 处的深度 | 49.8 mm |
| 绝缘材料 | PA |
| 职位数量 | 1 |
| 额定浪涌电压 | 8 kV |
| 测试力设定点 | 10 N |
| 最大负载电流 | 125 A (with 35 mm² conductor cross section) |
| 过电压类别 | III |
| 标称横截面 | 35 mm² |
| 连接数 | 2 |
| 测试电压设定点 | 9.8 kV |
| 每轴测试持续时间 | 5 h |
| 横截面范围 AWG | 10 ... 2 (converted acc. to IEC) |
| DIN导轨/固定支架 | NS 32/NS 35 |
| 绝缘材料组 | I |
| 环境温度（组装） | -5 °C ... 70 °C |
| 每个方向的冲击次数 | 3 |
| 环境温度（驱动） | -5 °C ... 70 °C |
| 环境温度（运行） | -60 °C ... 110 °C (Operating temperature range incl. self-heating; for max. short-term operating temperature, see RTI Elec.) |
| 每级连接数 | 2 |
| 连接符合标准 | IEC 60947-7-1 |
| 允许湿度（运行） | 20 % ... 90 % |
| 要求进行温升测试 | Increase in temperature ≤ 45 K |
| 短时耐受电流 35 mm² | 4.2 kA |
| 根据 UL 94 标准评定的阻燃等级 | V0 |
| 烟雾气体毒性 NFPA 130 (SMP 800C) | passed |
| 环境温度（储存/运输） | -25 °C ... 60 °C (for a short time, no longer than 24 h, -60°C to +70°C) |
| 允许湿度（储存/运输） | 30 % ... 70 % |
| 表面可燃性 NFPA 130 (ASTM E 162) | passed |
| 环形电缆接线片的识别颜色：蓝色 | 2.5 mm² |
| 冷态静电绝缘材料的应用 | -60 °C |
| 额定工况下的最大功率耗散 | 4.06 W |
| 环形电缆接线片的识别颜色：黄色 | 6 mm² |
| 轨道车辆防火（DIN EN 45545-2）R22 | HL 1 - HL 3 |
| 轨道车辆防火（DIN EN 45545-2）R23 | HL 1 - HL 3 |
| 轨道车辆防火（DIN EN 45545-2）R24 | HL 1 - HL 3 |
| 轨道车辆防火（DIN EN 45545-2）R26 | HL 1 - HL 3 |
| 烟雾的特定光学密度 NFPA 130 (ASTM E 662) | passed |
| 相对绝缘材料温度指数（电气，UL 746 B） | 130 °C |
产品描述
Stud connection terminal, nominal voltage: 800 V, nominal current: 125 A, number of connections: 2, number of poles: 1, connection type: Stud connection, Dimensioning cross-section: 35 mm², mounting c
主要特点
- 工业级品质
- 符合RoHS标准
- CE认证
- 一年保修
产品文档
数据表
技术规格和性能数据
用户手册
安装和操作指南
