| 参数 | 价值 |
|---|---|
| Repeated hard short circuits can reduce the melting integral of the integrated backup fuse. | |
| EMC | A |
| 保险丝 | electronic |
| 笔记 | Connection for signal line tested in accordance with EN 61000-4-4 with 1 kV; if necessary, customer must provide appropriate protective measures |
| 类型 | DIN rail module, one-piece |
| 深度 | 55.6 mm (incl. DIN rail 7.5 mm) |
| 宽度 | 6.2 mm |
| 高度 | ≤ 3000 m up to 52 °C (amsl) |
| 湿度 | B |
| 材料 | PBT |
| 围栏 | A |
| 振动 | B |
| 效率 | > 98.5 % |
| 温度 | A |
| 产品类型 | Device circuit breakers |
| 电压降 | 0.11 V (at 0.2 A) |
| 湿度测试 | 96 h, 95 % RH, 40 °C |
| 安装类型 | DIN rail: 35 mm |
| 额定电压 | 24 V DC |
| 关机时间 | ≤ 600 ms |
| 鉴别 | UL/C-UL Listed UL 508 |
| 产品系列 | PTCB |
| 通道 LED 关闭 | off (Channel switched off) |
| 红色通道 LED | lit (Channel switched off, over- or undervoltage active) |
| 连接名称 | Remote indication circuit |
| 频道数量 | 1 |
| 绊倒法 | E (electronic) |
| 污染程度 | 2 |
| 保护等级 | III |
| 额定电流输入 | 15 A DC (Total current input) |
| 剥皮长度 | 8 mm |
| 绿色通道 LED 灯 | lit (Channel switched on) |
| 连接方式 | Push-in connection |
| 横截面AWG | (converted acc. to IEC) |
| 故障安全元件 | 4 A DC |
| 工作电流 | 100 mA DC |
| 工作电压 | 10 V DC ... 30 V DC |
| 功率损耗 | typ. 0.1 W (No-load operation) |
| 休克(手术) | 30g (IEC 60068-2-27, Test Ea) |
| 通道式 LED 黄色 | flashing (Programming mode active) |
| 切换功能 | N/O contact |
| 介电强度 | max. 35 V DC (Load circuit) |
| 尺寸图 | |
| 反馈电阻 | max. 35 V DC |
| 职位数量 | 1 |
| 额定浪涌电压 | 0.5 kV |
| 保护程度 | IP20 |
| 最大容性负载 | 4 mF (Depending on the current setting and the short-circuit current available) |
| 备用保险丝 | Only required if Imaxof the power supply > the short-circuit switching capacity. Integrated failsafe element. |
| 温度降额 | 15 A (Total current at 60°C) |
| 测量公差 I | ± 8 % |
| 振动(操作) | 10 Hz ... 59.6 Hz (Amplitude ±0.35 mm; in accordance with IEC 60068-2-6, Test Fc) |
| 过压关闭 | ≥ 30.5 V DC (active) |
| 欠压关断 | ≤ 9.2 V DC (active) |
| 标准/规范 | EN 61000-6-2 |
| 主动电流限制 | typ. 1,1 x IN |
| 闭合电路电流 I0 | typ. 5 mA |
| 平均故障间隔时间 (IEC 61709,SN 29500) | 29188558 h (at 25 °C with 21 % load) |
| 模块初始化时间 | 40 ms |
| 导体横截面 AWG | 24 ... 12 |
| 额定电流(调整前) | 0.2 A |
| 导体横截面刚性 | 0.2 mm² ... 4 mm² |
| 环境温度(运行) | -30 °C ... 60 °C |
| 导体横截面可弯曲 | 0.2 mm² ... 2.5 mm² |
| 短路开关能力 | 300 A |
| 根据 UL 94 标准评定的阻燃等级 | V-0 |
| 环境温度(储存/运输) | -40 °C ... 70 °C |
| 频道关闭后的等待时间 | 5 s (at overload / short circuit) |
| 导体横截面,柔性,带套圈,带塑料套管 | 0.2 mm² ... 2.5 mm² |
| 导体横截面柔性,带套圈,无塑料套管 | 0.2 mm² ... 2.5 mm² |
技术规格和性能数据
安装和操作指南