| 参数 | 价值 |
|---|---|
| Safe isolation, reinforced insulation 6 kV between 250 V load current paths and 24 V logic paths | |
| 深度 | 104 mm |
| 震惊 | 10g for Δt = 11 ms (continuous shock: 5g for Δt = 16 ms) |
| 宽度 | 14 mm |
| 高度 | 80 mm |
| 类别 | 1 |
| 继电器类型 | Electromechanical relay in accordance with IEC/EN 61810 |
| 应用 | Forcibly guided contacts |
| 指定 | A1/A2 |
| 过滤时间 | 1 ms (Test pulse width, high test pulse and low test pulse) |
| 输出保险丝 | 6 A gL/gG |
| 产品类型 | Coupling relay |
| 安装类型 | DIN rail mounting |
| 恢复时间 | 500 ms (following demand of the safety function) |
| 鉴别 | CE-compliant |
| 浪涌电流 | typ. 100 mA (Δt = 10 ms at Us) |
| 产品系列 | PLC-INTERFACE |
| 状态显示 | 1 x green LED (PWR) |
| 联系材料 | AgNi |
| 房屋材料 | Polyamide |
| 最大海拔 | ≤ 2000 m (Above sea level) |
| 污染程度 | 2 |
| 剥皮长度 | 8 mm |
| 连接方式 | Push-in connection |
| 安装位置 | vertical or horizontal |
| 输出数量 | 2 |
| 平方总电流 | 37 A2(N/O contact, high-demand, observe derating) |
| 输出描述 | safety-related |
| 保护电路 | Serial protection against polarity reversal; Suppressor diode, 38.6 V/600 W |
| 交换容量 | min. 150 mW (N/O contact / N/C contact) |
| 开关频率 | max. 1 Hz |
| 保护程度 | IP20 |
| 过电压类别 | III |
| 典型释放时间 | < 50 ms (on demand via A1) |
| 组装说明 | See derating curve |
| 标准/法规 | IEC 60947-1 |
| 振动(操作) | 10 Hz ... 150 Hz, amplitude 0.75 mm, 1g |
| 触点开关类型 | 2 changeover contacts |
| 正常运行模式 | 100% operating factor |
| 性能水平(PL) | c |
| 机械使用寿命 | approx. 107cycles |
| UD的能耗 | 650 mW (to US) |
| 额定绝缘电压 | 250 V AC |
| 工作电压显示 | 1 x green LED (PWR) |
| 类型。与我们一起开始的时间 | < 70 ms (when controlled via A1) |
| 导线横截面 AWG | 26 ... 14 |
| 限制连续电流 | 6 A (N/O contact, high demand) |
| 安全完整性等级 (SIL) | 2 |
| 导体横截面刚性 | 0.14 mm² ... 2.5 mm² |
| 额定浪涌电压/绝缘 | Basic insulation 4 kV between all current paths and housing |
| 环境温度(运行) | -20 °C ... 60 °C (observe derating) |
| 额定控制电源电流 IS | 30 mA |
| 导体横截面可弯曲 | 0.14 mm² ... 2.5 mm² |
| 环境温度(储存/运输) | -20 °C ... 85 °C |
| 额定控制电路供电电压(美国) | 21.6 V DC ... 28.8 V DC |
| 机构场所的最低保护程度 | IP54 |
| 最大允许湿度(储存/运输) | 75 % (on average; 95% occasionally, non-condensing) |
| 最大允许相对湿度(运行) | 75 % (on average; 95% occasionally, non-condensing) |
| 额定工况下的最大功率耗散 | 4.825 W (UB= 30 V, US= 24 V, IS= 30 mA, IL² = 37 A, Rcontact= 0.1 Ω) |
| 开关容量符合IEC 60947-5-1标准 | 6 A (AC1, 230 V) |
| 导体横截面柔性,带套圈,无塑料套管 | 0.2 mm² ... 2.5 mm² |
技术规格和性能数据
安装和操作指南