| 参数 | 价值 |
|---|---|
| 514 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) | |
| EMC | B |
| 平均故障间隔时间 | 823 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) |
| MTTF | 1091 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| 笔记 | Please follow the special installation instructions in the documentation! |
| 深度 | 121 mm |
| 输入 | ± 2 kV |
| 宽度 | 35 mm |
| 高度 | ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) |
| 信号 | CAN |
| 电压 | 10 V |
| 评论 | Criterion B |
| 湿度 | A |
| 位延迟 | One telegram length (EXTENDED) |
| 围栏 | Required protection according to the Rules shall be provided upon installation on board |
| 振动 | A |
| CCCex 备注 | Use in potentially explosive areas is not permitted in China. |
| 证书 | CE-compliant |
| 标准 A | Normal operating behavior within the specified limits. |
| 标准 B | Temporary impairment to operational behavior that is corrected by the device itself. |
| 输出名称 | Relay output |
| 温度 | B |
| 产品类型 | Interface converter |
| 组装说明 | The product can be snapped onto all 35 mm DIN rails in accordance with EN 60715. |
| 安装类型 | DIN rail mounting |
| 鉴别 | II 3 G Ex ec IIC T4 Gc |
| 噪声排放 | EN 55011 |
| 抗噪声能力 | EN 61000-6-2 |
| 颜色(外壳) | green (RAL 6021) |
| 场强 | 10 V/m |
| 频率范围 | 80 MHz ... 3 GHz |
| 频道数量 | 2 (CAN_High / CAN_Low) |
| 文章修订 | 09 |
| 空气排放 | ± 8 kV |
| 剥皮长度 | 7.00 mm |
| 连接方式 | COMBICON plug-in screw terminal block |
| 接触放电 | ± 6 kV |
| 输出数量 | 1 |
| 拧紧扭矩 | 0.56 Nm ... 0.79 Nm |
| 文件格式/编码 | Bit stuffing, NRZ |
| 材料(房屋) | PA 6.6-FR |
| 传动速度 | ≤ 1 Mbps (Configurable via DIP switches) |
| 尺寸图 | |
| 申请须知 | Only for industrial use |
| 传输长度 | ≤ 5000 m (Dependent on the data rate and the protocol used) |
| 传输介质 | 2-wire twisted pair, shielded |
| 传输方法 | CSMA/CA |
| 保护程度 | IP20 |
| 电气隔离 | VCC // TBUS // CAN A // CAN B |
| 供电电压范围 | 10 V DC ... 30 V DC (via pluggable COMBICON screw terminal block) |
| 终端电阻 | 124 Ω (Integrated and ready to be switched) |
| 比特失真,输入 | ± 35 % |
| 总线设备数量 | ≤ 64 (per potential segment) |
| 标准/法规 | EN 61000-4-2 |
| 位失真,输出 | < 6.25 % |
| 触点开关类型 | N/C contact |
| 标称供电电压 | 24 V DC |
| 最大电流消耗 | 80 mA |
| 额定绝缘电压 | 85 V DC (In accordance with EN/IEC 60079-7, Annex H) |
| 最大开关电压 | 30 V DC |
| 最小开关电压 | 10 V DC |
| 限制连续电流 | 500 mA |
| 典型电流消耗 | 55 mA (24 V DC) |
| 电磁兼容性 | Conformance with EMC Directive 2014/30/EU |
| 环境温度(运行) | -20 °C ... 60 °C |
| 允许湿度(运行) | 30 % ... 95 % (non-condensing) |
| 状态和诊断指标 | LEDs: VCC (supply voltage), NET A (Mod/Net status port A), NET B (Mod/Net status port B), ACT (activity/data traffic) |
| 单线/接线端子,柔性 | 0.2 mm² ... 2.5 mm² |
| 单导体/接线端子,刚性 | 0.2 mm² ... 2.5 mm² |
| 环境温度(储存/运输) | -40 °C ... 85 °C |
| 测试电压数据接口/电源 | 1.5 kVrms(50 Hz, 1 min.) |
| 最大AWG导线横截面,柔性 | 14 |
| 最小AWG导线横截面,柔性 | 24 |
| 单线/接线端子,刚性 AWG 最大。 | 14 |
| 单线/端子点,刚性 AWG 最小。 | 24 |
| 额定工况下的最大功率耗散 | 1.32 W |
| 不含可能影响涂层应用的物质 | VDMA 24364:2018-05 |
技术规格和性能数据
安装和操作指南