现货 热销产品
NPF-120D-48
NPF-120D-48 MEANWELL AC-DC Single output LED Constant current (CC) with Active PFC, Output 48VDC / 2.5A, 3 i..
$0.00
美元
库存 3842 件
主要规格
姓名:
NPF-120D-48
状态:
Recommended Model
格式:
Box
系列:
NPF-120D
供应商信息
MEANWELL
产品：6448
通常在 2-3 个工作日内发货
质量保证
快速发货
技术支援
技术规格
| 参数 | 价值 |
|---|---|
| 姓名 | NPF-120D-48 |
| 状态 | Recommended Model |
| 格式 | Box |
| 系列 | NPF-120D |
| 调光 | 0-10V, 1-10V, Resistance 0-100K, PWM Signal 10V |
| 审批 | CCC, CE, EAC, ENEC, UL |
| 功率（瓦） | 120,00 |
| 子格式 | IP67 |
| 宽度（毫米） | 63.00 |
| 高度（毫米） | 37.50 |
| 交流输入最大值 | 305,00 |
| 交流输入最小值 | 90,00 |
| 应用程序 | Lighting |
| 制造商 | MEAN WELL |
| 产品类型 | LED Driver |
| 隔离（V） | 3.750,00 |
| 峰值功率（瓦） | One hundred twenty |
| 输入连接器 | Cable |
| 输入频率 | 50 Hz, 60 Hz |
| 长/背景 | 191.00 |
| 详细描述 | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format in box waterproof plasticIP67.Input range90-305Vca47-63Hz.Output in constant current2,5 A.Range of output voltage28,8 @ 48vdcaccording to demade the load.Power:120W.Efficiency typical:90%.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10V,a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Input class II without grounding.Factor corrector, power>0,96to 230vac at full load.Consumption without load <0,50 W.Operating temperature range of caseTcfrom-40ºCup+90ºC.Dimensions (Length x Width x Height):191 x 63 x 37.5 mm5 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source can operate in either Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.You can also work in voltage mode constant giving a fixed voltage of 12V if the load is powered at constant voltage and does not overcome the maximum output power.With plastic housing, watertight, designed for lighting applications in indoor, decorative, architectural, signage, mobile (roads, screens...) or tunnel lighting. Suitable for damp and wet conditions. Approved HL Class I Division 2 for ex-zones in the US.Can be adjusted by regulatory assets or liabilities0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| 输出连接器 | Cable |
| 条目类型 CA | Single-phase |
| 保修期（年） | 5,00 |
| 原产地 | China |
| 输出电流 mA | Two thousand five hundred |
| 最小输出强度（mA） | 2.500,00 |
| 最大输出强度（mA） | 2.500,00 |
产品描述
More details
主要特点
- 工业级品质
- 符合RoHS标准
- CE认证
- 一年保修
技术细节
LED driver dimmable.
产品文档
数据表
技术规格和性能数据
用户手册
安装和操作指南
