现货 热销产品
LCM-40DA
LCM-40DA MEANWELL AC-DC Multi-Stage LED driver Constant Current (CC), Modular output 0.35A/0.5A/0.6A/0.7A/0...
$0.00
美元
库存 3651 件
主要规格
姓名:
LCM-40DA
力量:
42W
状态:
Recommended Model
库存:
Yes
供应商信息
MEANWELL
产品：6448
通常在 2-3 个工作日内发货
质量保证
快速发货
技术支援
技术规格
| 参数 | 价值 |
|---|---|
| 姓名 | LCM-40DA |
| 力量 | 42W |
| 状态 | Recommended Model |
| 库存 | Yes |
| 格式 | Box |
| 系列 | LCM-40DA |
| 调光 | DALI, Push-button |
| 审批 | CCC, CE, ENEC, UL |
| 功率（瓦） | 42,00 |
| 子格式 | IP20 |
| 宽度（毫米） | 81.50 |
| 高度（毫米） | 23.00 |
| 交流输入最大值 | 295,00 |
| 交流输入最小值 | 180,00 |
| 应用程序 | Lighting |
| 制造商 | MEAN WELL |
| 产品类型 | LED Driver |
| 隔离（V） | 3.750,00 |
| 输出电流 | 350mA |
| 峰值功率（瓦） | Forty two |
| 输入连接器 | Quick Connector |
| 输入频率 | 50 Hz, 60 Hz |
| 长/背景 | 123.50 |
| 详细描述 | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format in plastic boxIP20.Input range180-295Vca47-63Hz.Current output selectable by micro-switch350, 500, 600, 700, 900 or 1050mA.Output current350mA500mA600mA700mA900mA1050mAPower42W42W42W42W42W42WRange of Output Voltage2-100Vcc2-80Vcc2-67Vcc2-57Vcc2-45Vcc2-40VccEfficiency typical:91%.Regulation DALI0% to 100% of the intensity of output or push-button (PUSH-DALI). Certificate to DALI.We can regulate by push-button by connecting the input line cord to a push-button normally open and then to the Push (up-regulation in primary). You can connect any number of drivers LCM-GIVES the same push-button.Synchronization: we can sync up10 unitsvia the wires LCM-xxx-SYNC25 in such a way that by regulating a source other do the same regulation without the need to be connected to the bus DALI or push-button. We also make sure that if we use dimming by push button fonts are not desincronizarán.Input class II without grounding.OutputAuxiliary 12V/50mA Optionalfor the modelLCM-40DA-AUX.Factor corrector, power>0.975to 230vac at full load.Consumption at no load <0,5 W (<1.2 for LCM-40DA-AUX)Operating temperature range of caseTcfrom-30ºCup+60ºC.Dimensions (Length x Width x Height):123,5 x to 81.5 x 23mm.3 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream. This source has one outputoptional auxiliaryof12V/50mAfor the model LCM-40DA-AUX.This source works on a Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.Be sure to adjust the output current desired using the selector current.For more information please see the datasheet in the section attachments.Input for protection by temperature of the LED modules. The driver has an input to connect a NTC sensor (resistance of a negative coefficient) which allows us to reduce the output current in case of excess of temperature in the LED modules. If we're not going to use this input protection, we can use it to connect a fixed resistor and adjust the output current to values lower intermediate up to 56% lower than the value selected with the DIP-Switch. For example if we want a current of 630mA we can adjust the output with the jumpers to 700mA and connect a resistor of 34kOhmnios. In this model, the maximum output current can also be set by using commands DALI. If we set the maximum value of output at 90% even though the command DALI shows 100% will give us only 90% (if it is set to 700mA will give us 630mA) and we can still use the input NTC to protect the LED modules. For more information please see the datasheet in the tab "Attachments" and you can use the Excel file to calculate the value of the resistance.With plastic housing, designed for applications of LED lighting and architectural. Suitable for indoor lighting, offices, LED panels.Low ripple current, no flicker (flicker-free).Compatible with any system DALI. |
| 输出连接器 | Quick Connector |
| 条目类型 CA | Single-phase |
| 保修期（年） | 3,00 |
| 原产地 | China |
| 输出电流 mA | 350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 850, 900, 950, 1000, 1050 |
| 输出电压范围 | 2-100Vcc |
| 最小输出强度（mA） | 350,00 |
| 最大输出强度（mA） | 1.050,00 |
产品描述
More details
主要特点
- 工业级品质
- 符合RoHS标准
- CE认证
- 一年保修
技术细节
LED driver dimmable.
产品文档
数据表
技术规格和性能数据
用户手册
安装和操作指南
