| 参数 | 价值 |
|---|---|
| GTIN | 4046356073271 |
| 订单密钥 | 2878379 |
| (一般的) | 3 mA (without actuators) |
| 产品目录页 | Page 129 (C-6-2017) |
| 深度(注) | 71.5 mm |
| 包装单元 | 1 pc |
| 宽度(注) | 80 mm |
| 身高(注) | 119.8 mm |
| 原产地 | DE (Germany) |
| (数字输出) | max. 0.83 A DC (from UBK) |
| (内联电位) | Shock in acc. with EN 60068-2-27/IEC 60068-2-27 Operation: 25g, 11 ms duration, semi-sinusoidal shock impulse |
| 海关关税编号 | 85176200 |
| 职称(通用) | Segment circuit supply (US) |
| 输入名称(接口) | Digital inputs |
| 滤波时间(接口) | 3 ms |
| 供电电压(一般) | 24 V DC |
| 尺寸说明(注) | Specfications with connectors |
| 尺寸图(注) | |
| 输入电压(接口) | 24 V DC |
| 电源单元(通用) | max. 8 A DC (Sum of UM+ US; 4 A, maximum, when used in potentially explosive areas.) |
| (标准和法规) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| 输出名称(数字输入) | Digital outputs |
| 当前消耗量(一般) | max. 8 A DC |
| 指定(数字输出) | Bus coupler supply UBC; Communications power UL(7.5 V) and the analog supply UANA(24 V) are generated from the bus coupler supply. |
| 输入(接口)数量 | 8 |
| 连接方式(接口) | Inline connector |
| 供电电压范围(一般) | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| 输出电压(数字输入) | 24 V DC -1 V (At nominal current) |
| 保护类型(接口) | Reverse polarity protection |
| 波长(环境条件) | 660 nm |
| 指定(环境条件) | Inline local bus |
| 供电电流(数字输出) | 250 mA |
| 供电电压(数字输出) | 24 V DC (via Inline connector) |
| 防护等级(尺寸) | IP20 |
| 连接方式(数字输入) | Inline connector |
| 连接技术(接口) | 3-wire |
| 输出数量(数字输入) | 4 |
| 典型响应时间(接口) | approx. 500 µs |
| 连接方式(数字输出) | Spring-cage connection |
| 额定负载,灯(数字输入) | 12 W |
| 功耗(数字输出) | typ. 3 W (entire device) |
| 保护类型(数字输入) | Short-circuit and overload protection |
| 机械测试(在线电位) | Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g |
| 通道数(环境条件) | 2 |
| 标称负载,欧姆负载(数字输入) | 12 W |
| 防护等级(内联电位) | III, IEC 61140, EN 61140, VDE 0140-1 |
| 单件重量(不含包装) | 367.900 g |
| 气压(运行)(尺寸) | 80 kPa ... 106 kPa (up to 3000 m above sea level) |
| 当前消耗量(数字输出) | typ. 250 mA (from UBK) |
| 输入(接口)描述 | EN 61131-2 type 1 |
| (模块电子元件的电源) | Failure of the actuator supply Yes |
| 中国RoHS(标准和法规) | Environmentally Friendly Use Period = 50 |
| 连接方式(环境条件) | Inline data jumper |
| 连接技术(数字输入) | 3-wire |
| REACH SVHC(标准和法规) | Lead 7439-92-1 |
| 供电电压范围(数字输出) | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| 标称输出电压(数字输入) | 24 V DC |
| 传输速度(环境条件) | 500 kbps / 2 Mbps (automatic detection, no combined system) |
| 额定负载,感性(数字输入) | 12 VA (1.2 H, 48 Ω) |
| UIN(接口)处的标称输入电流 | typ. 3 mA |
| 输入电压范围“0”信号(接口) | -30 V DC ... 5 V DC |
| 输入电压范围“1”信号(接口) | 15 V DC ... 30 V DC |
| 环境温度(操作)(尺寸) | -25 °C ... 55 °C (observe derating) |
| 气压(储存/运输)(尺寸) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| 允许湿度(运行)(尺寸) | 10 % ... 95 % (according to DIN EN 61131-2) |
| 使用限制(关键商业数据) | EMC: class A product, see manufacturer's declaration in the download area |
| 每通道(接口)典型输入电流 | typ. 3 mA |
| 信号从 0 变为 1 时的延迟(接口) | 5 ms |
| 信号从 1 变为 0 时的延迟(接口) | 5 ms |
| 净重(模块电子元件电源) | 367.9 g |
| 每个模块的最大输出电流(数字输入) | 2 A |
| 每通道最大输出电流(数字输入) | 500 mA |
| 安装类型(模块电子元件的电源) | DIN rail mounting |
| 环境温度(储存/运输)(尺寸) | -40 °C ... 85 °C |
| 允许湿度(储存/运输)(尺寸) | 10 % ... 95 % (according to DIN EN 61131-2) |
| 诊断信息(模块电子元件电源) | Short-circuit / overload of the digital outputs Yes |
| 每个模块/接线端子的最大输出电流(数字输入) | 2 A |
| 重量规格说明(模块电子元件的电源) | with connectors |
技术规格和性能数据
安装和操作指南