| 参数 | 价值 |
|---|---|
| Sensor supply failure yes | |
| 类型 | modular |
| 深度 | 71.5 mm |
| 宽度 | 80 mm |
| 高度 | 119.8 mm |
| 输入名称 | Digital inputs |
| 输出名称 | Digital outputs |
| 电流消耗 | max. 0.98 A (with max. number of connected I/O terminal blocks) |
| 产品类型 | I/O component |
| 信号延迟 | typ. 1.2 ms |
| ID 代码(十六进制) | none |
| 输入电压 | 24 V DC |
| 安装类型 | DIN rail mounting |
| 输出电压 | 24 V DC -1 V (At nominal current) |
| 产品系列 | Inline |
| 供电电压 | 24 V DC (via Inline connector) |
| 连接名称 | Inline connector |
| 频道数量 | 12 |
| 注册长度 | 16 bit |
| 文章修订 | 05 |
| 输入数量 | 8 |
| 保护等级 | III (IEC 61140, EN 61140, VDE 0140-1) |
| 剥皮长度 | 8 mm |
| 连接方式 | RJ45 jack |
| 输出数量 | 4 |
| 交付范围 | including Inline connectors and marking fields |
| 输入地址区域 | 8 bit |
| 额定负载,灯 | 12 W |
| 尺寸说明 | Specfications with connectors |
| 保护电路 | Reverse polarity protection; Suppressor diode |
| 特殊属性 | Extreme conditions version |
| 传动速度 | 10/100 Mbps |
| 尺寸图 | |
| 额定负载,欧姆 | 12 W |
| 申请须知 | Only for industrial use |
| 输出地址区域 | 4 bit |
| 保护程度 | IP20 |
| 诊断信息 | Short-circuit or overload of the digital outputs yes |
| 接口数量 | 2 |
| 供电电压范围 | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| 传输物理学 | Ethernet in RJ45 twisted pair |
| 连接技术 | 3-conductor |
| 过电流关断 | min. 0.7 A |
| 典型响应时间 | approx. 500 µs |
| 过载行为 | Auto restart |
| 标称输出电压 | 24 V DC |
| 额定负载,感性 | 12 VA (1.2 H, 48 Ω) |
| 气压(运行) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| 输入描述 | EN 61131-2 type 1 |
| 标称输入电压 UIN | 24 V DC |
| 导体横截面 AWG | 28 ... 16 |
| 支持的设备数量 | max. 63 (per station) |
| UIN 处的标称输入电流 | typ. 3 mA |
| 导体横截面刚性 | 0.08 mm² ... 1.5 mm² |
| 连接方式说明 | Auto negotiation and autocrossing |
| 电压关闭时的行为 | The output follows the power supply without delay |
| 刚性导体横截面 | 0.08 mm² ... 1.5 mm² |
| 输入电压范围“0”信号 | -30 V DC ... 5 V DC |
| 输入电压范围“1”信号 | 15 V DC ... 30 V DC |
| 环境温度(运行) | -25 °C ... 55 °C (Standard) |
| 气压(储存/运输) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| 电感过载时的行为 | Output can be destroyed |
| 导体横截面可弯曲 | 0.08 mm² ... 1.5 mm² |
| 本地总线设备的最大数量 | 61 (The on-board I/Os are two devices) |
| 关闭时的输出电流 | max. 10 µA (When not loaded, a voltage can be measured even at an output that is not set.) |
| 允许湿度(运行) | 10 % ... 95 % (non-condensing) |
| 柔性导体横截面 | 0.08 mm² ... 1.5 mm² |
| 每个模块的最大输出电流 | max. 2 A |
| 每通道典型输入电流 | typ. 3 mA |
| 信号从0变为1时的延迟 | 1.2 ms |
| 信号从 1 变为 0 时的延迟 | 1.2 ms |
| 环境温度(储存/运输) | -40 °C ... 85 °C |
| 具有参数通道的设备数量 | max. 16 |
| 允许湿度(储存/运输) | 10 % ... 95 % (non-condensing) |
| 对短脉冲的反向电压电阻 | Reverse voltage proof |
| 额定工况下的最大功率耗散 | 6.3 W |
| 可连接的本地总线设备数量 | max. 61 (The on-board I/Os are two devices) |
| 支持远程总线分支的支路终端数量 | 0 |
技术规格和性能数据
安装和操作指南