| 参数 | 价值 |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| 笔记 | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| 类型 | Standard |
| 沥青 | 5 mm |
| 编码 | For details, refer to the product drawing in the “Downloads” tab. |
| 结果 | Test passed |
| 振幅 | 0.35 mm (10 Hz ... 60.1 Hz) |
| 频率 | 10 - 150 - 10 Hz |
| 宽度 [w] | 22.5 mm |
| 高度 [h] | 15 mm |
| 长度 [l] | 18.77 mm |
| 安全提示 | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| 扫频速度 | 1 octave/min |
| 锁定类型 | without |
| 产品类型 | PCB connector |
| 循环次数 | 25 |
| 规格 | IEC 60999-1:1999-11 |
| 行数 | 1 |
| 产品系列 | ICC..-PSC2,5/..-5,0 |
| 热应力 | 100 °C/168 h |
| 颜色(外壳) | black (9005) |
| 安装法兰 | without |
| 联系材料 | Cu alloy |
| 腐蚀应力 | 0.2 dm3SO2on 300 dm3/40 °C/1 cycle |
| 连接方式 | Screw connection with tension sleeve |
| 包装类型 | packed in cardboard |
| 接触电阻 | 1.25 mΩ |
| 污染程度 | 3 |
| 尺寸图 | |
| 绝缘材料 | PA |
| 职位数量 | 4 |
| 潜在人数 | 4 |
| 接触电阻 R1 | 1.25 mΩ |
| 接触电阻 R2 | 1.28 mΩ |
| 连接数 | 4 |
| 每轴测试持续时间 | 2.5 h |
| 表面特征 | Tin-plated |
| 绝缘材料组 | I |
| CTI 符合 IEC 60112 标准 | 600 |
| 测试职位数量 | 4 |
| 插入/拔出周期 | 25 |
| 环境温度(组装) | -5 °C ... 100 °C |
| 环境温度(运行) | -40 °C ... 105 °C (dependent on the derating curve) |
| 工频耐受电压 | 2.21 kV |
| 导体/PCB连接方向 | 0 ° |
| 每点抽取强度约 | 8.7 N |
| 每根插管的插入强度约为 | 9.2 N |
| 相对湿度(储存/运输) | 30 % ... 70 % |
| 根据 UL 94 标准评定的阻燃等级 | V0 |
| 海平面冲击耐受电压 | 4.8 kV |
| 环境温度(储存/运输) | -40 °C ... 55 °C |
| 金属表面终端点(顶层) | Tin (Sn) |
| 绝缘电阻,相邻位置 | > 1 TΩ |
| 根据 EN 60695-2-12 标准,灼热丝可燃性指数 GWFI | 850 |
| 根据 EN 60695-2-13 标准,灼热丝点火温度 GWIT | 775 |
| 根据 EN 60695-10-2 标准进行球压试验的温度 | 125 °C |
| 导线横截面积/导线类型/牵引力设定值/实际值 | 0.2 mm² / solid / > 10 N |
技术规格和性能数据
安装和操作指南