| 参数 | 价值 |
|---|---|
| Protection against polarity reversal (segment supply/main supply); Parallel diodes for protection against polarity reversal; in the event of an error the high current flowing through the diodes causes the fuse connected upstream to blow. | |
| 类型 | modular |
| 深度 | 71.5 mm |
| 宽度 | 48.8 mm |
| 高度 | 135 mm |
| 电流消耗 | max. 1.25 A (at nominal voltage; consisting of: 0.75 A DC for the communications power and 0.5 A DC for the analog voltage supply) |
| 产品类型 | I/O component |
| ID 代码(十六进制) | none |
| 安装类型 | DIN rail mounting |
| 产品系列 | Inline |
| 供电电压 | 24 V DC (via Inline connector) |
| 连接名称 | Inline connector |
| 注册长度 | 0 bit |
| 文章修订 | 06 |
| 保护等级 | III (IEC 61140, EN 61140, VDE 0140-1) |
| 剥皮长度 | 8 mm |
| 连接方式 | Inline shield connector |
| 交付范围 | including Inline connectors and marking fields |
| 输入地址区域 | 0 Byte |
| 保护电路 | Surge protection (segment supply, main supply, 24 V supply); Input protective diodes (can be destroyed by permanent overload)Pulse loads up to 1500 W are short circuited by the input protective diode. |
| 特殊属性 | for extending the Inline local bus |
| 传动速度 | 500 kbps / 2 Mbps (Can be used in Inline stations with these transmission speeds) |
| 尺寸图 | |
| 申请须知 | Only for industrial use |
| 输出地址区域 | 0 Byte |
| 保护程度 | IP20 |
| 接口数量 | 1 (incoming local bus) |
| 供电电压范围 | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| 传输物理学 | Copper |
| 所需参数数据 | 0 Byte |
| 气压(运行) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| 导体横截面 AWG | 28 ... 16 |
| 所需配置数据 | 0 Byte |
| 导体横截面刚性 | 0.08 mm² ... 1.5 mm² |
| 连接方式说明 | Standard INTERBUS cable |
| 刚性导体横截面 | 0.08 mm² ... 1.5 mm² |
| 环境温度(运行) | -25 °C ... 55 °C |
| 气压(储存/运输) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| 导体横截面可弯曲 | 0.08 mm² ... 1.5 mm² |
| 允许湿度(运行) | 10 % ... 95 % (non-condensing) |
| 柔性导体横截面 | 0.08 mm² ... 1.5 mm² |
| 环境温度(储存/运输) | -25 °C ... 85 °C |
| 具有参数通道的设备数量 | 63 |
| 允许湿度(储存/运输) | 10 % ... 95 % (non-condensing) |
| 额定工况下的最大功率耗散 | 1.45 W |
| 可连接的本地总线设备数量 | max. 63 (without additional power terminal block, observe allowable total current consumption) |
| 测试电压:5V 本地总线输入/24V 主电源,24V 段电源 | 500 V AC, 50 Hz, 1 min. |
| 测试电压:24V 主电源、24V 分段电源、24V 电压生成电源(UL 和 UANA/功能接地)。 | 500 V AC, 50 Hz, 1 min. |
| 测试电压:7.5V 通信电源、24V 模拟电源、24V 电压生成电源(UL 和 UANA/功能接地)。 | 500 V AC, 50 Hz, 1 min. |
| 测试电压:5V 本地总线输入电源/7.5V 通信电源,24V 模拟电源,24V 电压生成电源(ULand UANA)。 | 500 V AC, 50 Hz, 1 min. |
| 测试电压:7.5V 通信电源、24V 模拟电源、24V UL 和 UANA 电压发生电源/24V 主电源、24V 分段电源 | 500 V AC, 50 Hz, 1 min. |
技术规格和性能数据
安装和操作指南