| 参数 | 价值 |
|---|---|
| 类型 | modular |
| 深度 | 71.5 mm |
| 宽度 | 12.2 mm |
| 高度 | 119.8 mm |
| CCCex 备注 | Use in potentially explosive areas is not permitted in China. |
| 输出名称 | Digital outputs |
| 电流消耗 | max. 30 mA |
| 产品类型 | I/O component |
| ID 代码(十六进制) | BD |
| 安装类型 | DIN rail mounting |
| ID 代码(十进制) | 189 |
| 操作模式 | Process data mode with one byte |
| 输出电压 | 24 V (US- 1 V) |
| 产品系列 | Inline |
| 供电电压 | 7.5 V DC (via voltage jumper) |
| 连接名称 | Inline connector |
| 频道数量 | 8 |
| 注册长度 | 8 bit |
| 文章修订 | 09 |
| 污染程度 | 2 (IEC 60664-1, EN 60664-1) |
| 保护等级 | III (IEC 61140, EN 61140, VDE 0140-1) |
| 剥皮长度 | 8 mm |
| 连接方式 | Inline data jumper |
| 长度代码(十进制) | 129 |
| 长度代码(十六进制) | 81 |
| 输出数量 | 8 |
| 交付范围 | including Inline connector and labeling field |
| 输入地址区域 | 0 Byte |
| 额定负载,灯 | 12 W |
| 尺寸说明 | Housing dimensions |
| 保护电路 | Overload protection, short-circuit protection of outputs; electronic |
| 传动速度 | 500 kbps |
| 尺寸图 | |
| 额定负载,欧姆 | 12 W (48 Ω) |
| 申请须知 | Only for industrial use |
| 输出地址区域 | 1 Byte |
| 保护程度 | IP20 |
| 诊断信息 | Short-circuit or overload of the digital outputs Error message in the diagnostic code (bus) and display (2 Hz) via the LED (D) on the module |
| 接口数量 | 2 |
| 过电压类别 | II (IEC 60664-1, EN 60664-1) |
| 过程数据通道 | 8 bit |
| 供电电压范围 | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| 连接技术 | 1-conductor |
| 过电流关断 | min. 0.7 A |
| 过载行为 | Auto restart |
| 标称输出电压 | 24 V DC |
| 额定负载,感性 | 12 VA (1.2 H, 48 Ω) |
| 所需参数数据 | 3 Byte |
| 气压(运行) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| 导体横截面 AWG | 28 ... 16 |
| 所需配置数据 | 4 Byte |
| 导体横截面刚性 | 0.08 mm² ... 1.5 mm² |
| 电压关闭时的行为 | The output follows the power supply without delay |
| 刚性导体横截面 | 0.08 mm² ... 1.5 mm² |
| 环境温度(运行) | -25 °C ... 55 °C |
| 气压(储存/运输) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| 电感过载时的行为 | Output can be destroyed |
| 导体横截面可弯曲 | 0.08 mm² ... 1.5 mm² |
| 关闭时的输出电流 | max. 300 µA |
| 关闭时的输出电压 | max. 1 V |
| 允许湿度(运行) | 10 % ... 95 % (non-condensing) |
| 柔性导体横截面 | 0.08 mm² ... 1.5 mm² |
| 每个模块的最大输出电流 | 4 A |
| 每通道最大输出电流 | 500 mA |
| 环境温度(储存/运输) | -25 °C ... 85 °C |
| 允许湿度(储存/运输) | 10 % ... 95 % (non-condensing) |
| 对短脉冲的反向电压电阻 | Reverse voltage proof |
| 额定工况下的最大功率耗散 | 0.85 W |
| 在欧姆额定负载下的最大工作频率 | max. 300 Hz (this switching frequency is limited by the data rate selected, the number of bus devices, the structure of the bus, the software used and the control or computer system used) |
| 测试电压:24V 电源(I/O)/功能地 | 500 V AC, 50 Hz, 1 min. |
| 限制电路中断时感应电压 | -45.8 V ... -15 V |
| 测试电压:7.5V 电源(总线逻辑)/24V 电源(I/O) | 500 V AC, 50 Hz, 1 min. |
| 测试电压:7.5V 电源(总线逻辑)/功能地 | 500 V AC, 50 Hz, 1 min. |
技术规格和性能数据
安装和操作指南