| 参数 | 价值 |
|---|---|
| max. 8 A (Device) | |
| 类型 | modular |
| 深度 | 71.5 mm |
| 宽度 | 48.8 mm |
| 高度 | 140.5 mm |
| CCCex 备注 | Use in potentially explosive areas is not permitted in China. |
| 输出名称 | Digital outputs |
| 电流消耗 | max. 90 mA |
| 产品类型 | I/O component |
| ID 代码(十六进制) | BD |
| 安装类型 | DIN rail mounting |
| ID 代码(十进制) | 189 |
| 操作模式 | Process data mode with one word |
| 输出电流 | max. 500 mA (per channel) |
| 输出电压 | 24 V DC (US- 1 V) |
| 产品系列 | Inline |
| 供电电压 | 7.5 V DC (via voltage jumper) |
| 连接名称 | Inline connector |
| 频道数量 | 16 |
| 注册长度 | 16 bit |
| 文章修订 | 11 |
| 污染程度 | 2 (IEC 60664-1, EN 60664-1) |
| 保护等级 | III (IEC 61140, EN 61140, VDE 0140-1) |
| 剥皮长度 | 8 mm |
| 连接方式 | Inline data jumper |
| 长度代码(十进制) | 01 |
| 长度代码(十六进制) | 01 |
| 输出数量 | 16 |
| 交付范围 | including Inline connectors and marking fields, connectors numbered individually |
| 输入地址区域 | 0 Byte |
| 额定负载,灯 | 12 W |
| 尺寸说明 | Housing dimensions |
| 保护电路 | Overload protection, short-circuit protection of outputs; electronic |
| 传动速度 | 500 kbps |
| 尺寸图 | |
| 额定负载,欧姆 | 12 VA (48 Ω) |
| 申请须知 | Only for industrial use |
| 输出地址区域 | 2 Byte |
| 保护程度 | IP20 |
| 诊断信息 | Short-circuit or overload of the digital outputs Error message in the diagnostic code (bus) and display (2 Hz) via the LED (D) on the module |
| 接口数量 | 2 |
| 过电压类别 | II (IEC 60664-1, EN 60664-1) |
| 过程数据通道 | 16 bit |
| 供电电压范围 | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| 连接技术 | 3-conductor |
| 过电流关断 | min. 0.7 A |
| 过载行为 | Auto restart |
| 最大浪涌电流 | max. 1.5 A (at nominal lamp load for 20 ms) |
| 标称输出电压 | 24 V DC |
| 额定负载,感性 | 12 W (1.2 H, 48 Ω) |
| 所需参数数据 | 4 Byte |
| 气压(运行) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| 导体横截面 AWG | 28 ... 16 |
| 所需配置数据 | 4 Byte |
| 导体横截面刚性 | 0.08 mm² ... 1.5 mm² |
| 电压关闭时的行为 | The output follows the power supply without delay |
| 刚性导体横截面 | 0.08 mm² ... 1.5 mm² |
| 环境温度(运行) | -25 °C ... 55 °C |
| 气压(储存/运输) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| 电感过载时的行为 | Output can be destroyed |
| 导体横截面可弯曲 | 0.08 mm² ... 1.5 mm² |
| 关闭时的输出电流 | max. 300 µA |
| 关闭时的输出电压 | max. 2 V |
| 允许湿度(运行) | 10 % ... 95 % (non-condensing) |
| 柔性导体横截面 | 0.08 mm² ... 1.5 mm² |
| 环境温度(储存/运输) | -25 °C ... 85 °C |
| 允许湿度(储存/运输) | 10 % ... 95 % (non-condensing) |
| 对短脉冲的反向电压电阻 | Reverse voltage proof |
| 额定工况下的最大功率耗散 | 3.4 W |
| 在欧姆额定负载下的最大工作频率 | max. 300 Hz (this switching frequency is limited by the number of bus devices, the structure of the bus, the software used and the control or computer system used) |
| 测试电压:24V 电源(I/O)/功能地 | 500 V AC, 50 Hz, 1 min. |
| 限制电路中断时感应电压 | -46 V ... -15 V |
| 测试电压:7.5V 电源(总线逻辑)/24V 电源(I/O) | 500 V AC, 50 Hz, 1 min. |
| 测试电压:7.5V 电源(总线逻辑)/功能地 | 500 V AC, 50 Hz, 1 min. |
| 接地连接时,关闭时输出电流中断 | max. 25 mA |
技术规格和性能数据
安装和操作指南