现货 热销产品
HLC1CM
HLC1CM HL-C1C-M PANASONIC Driver for connecting 2 sensor heads HL-C1 series
$0.00
美元
库存 3584 件
主要规格
物品:
Specifications
重量:
Net weight: 300 g approx.
细节:
Controller
产品:
Ultra High-speed Laser Displacement Sensor [CCD Style]
供应商信息
PANASONIC
产品：4316
通常在 2-3 个工作日内发货
质量保证
快速发货
技术支援
技术规格
| 参数 | 价值 |
|---|---|
| 物品 | Specifications |
| 重量 | Net weight: 300 g approx. |
| 细节 | Controller |
| 产品 | Ultra High-speed Laser Displacement Sensor [CCD Style] |
| 配饰 | - |
| 零件编号 | HL-C1C-M |
| 报警输出 | Photo-MOS relay- Maximum load current: 50 mA- Applied voltage: 30 V DC or less (between alarm output and COM)- ON impedance: 35 Ohm or less- Operation time: Max. 2 ms |
| 电缆长度 | Power line: Less than 10 m 32.808 ftSignal line: Less than 30 m 98.425 ft |
| 产品名称 | Ultra High-speed Laser Displacement Sensor HL-C1(Discontinued) |
| 采样率 | Selectable from 100 micro s / 144 micro s / 200 micro s / 255 micro s / 332 micro s / 498 micro s / 1,000 micro s |
| 保持功能 | Selectable from NORMAL / P-P / PEAK / VALLEY(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| 产品编号 | HL-C1C-M |
| 供电电压 | 24 V DC plus or minus 10 % including ripple 0.5 V (P-P) |
| 数字滤波器 | High pass: OFF, 10 to 2,000 Hz (9 steps)Low pass: OFF, 10 to 2,000 Hz (9 steps)(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| 指标：暗色 | Red LED (lights up upon disabled measurement due to insufficient light at sensor head 1 or 2) |
| 输入端零设置 | Zero set: ON when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input |
| 校准：跨度 | 0.9000 to 1.1000(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| 零设置关闭输入 | Zero set: OFF when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input |
| 校准：偏移 | plus or minus 20.0000 mm plus or minus 0.787 in(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| 当前消耗 | When 1 sensor is connected: 430 mA approx.When 2 sensors are connected: 550 mA approx. |
| 指示灯：明亮 | Red LED (lights up upon disabled measurement due to excessive light at sensor head 1 or 2) |
| 计算函数 | L plus or minus KA, L plus or minus KB, L plus or minus K (A plus or minus B)A, B: Sensor head 1, Sensor head 2 measurement values, L = plus or minus 999.9999, K = 0.0001 to 99.9999(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| 串行输入/输出 | RS-232C |
| Connectale传感器头 | Maximum 2 sensor heads |
| 模拟输出：电流 | Output current: 4 to 20 mA/F.S. [default setting when diffuse reflective mode is selected (Note 2)]Output range: 0 to 29.5 mA (maximum of 25 mA at max. load impedance)Load impedance: 250 Ohm or less(Note 1) The maximum analog output current will vary with load impedance.(Note 2) If specular reflective mode is selected, then the default setting is 5.6 to 18.4 mA/F.S. |
| 模拟输出：电压 | Output voltage: plus or minus 5 V/F.S. [default setting when diffuse reflective mode is selected (Note) ]Output range: -10.9 to +10.9 VOutput current: Max. 2 mA, Output impedance: 50 Ohm(Note) If specular reflective mode is selected, then the default setting is plus or minus 4 V/F.S. |
| 平均样本数 | OFF, 2 to 32,768 times (16 steps)(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| 判断结果（O1，O2） | Photo-MOS relay- Maximum load current: 50 mA- Applied voltage: 30 V DC or less (between judgment output and COM)- ON impedance: 35 Ohm or less- Operation time: Max. 2 ms |
| 指示器：激光发射 | Green LED (lights up during laser emission from sensor head 1 or sensor head 2, or immediately before laser emission) |
| 温度特性 | plus or minus 0.01 % F.S./degrees |
| 定时输入（激光发射） | Laser emission stops or continues when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input or there is an open circuit: determined based on input mode selection. |
| 报警输出：输出操作 | Opened when the amount of light is excessive or insufficient. |
| 报警输出：短路保护 | Incorporated |
| 环境耐受性：环境湿度 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 环境耐受性：抗冲击性 | 196 m/s2 (20 G approx.) in X, Y and Z directions for 3 times each |
| 判断输出（O1，O2）：输出操作 | Opened or closed when the threshold value is reached. Determined based on judgment output mode selection. (The threshold value varies with the hysteresis setting.) |
| 环境耐受性：环境温度 | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| 环境耐受性：抗振性 | 10 to 55 Hz frequency (period: 1 min.) 0.75 mm 0.030 in amplitude in X,Y and Z directions for 30 min. each |
| 判断结果（O1、O2）：利用类别 | DC-12 or DC-13 |
| 判断输出（O1、O2）：短路保护 | Incorporated |
产品描述
More details
主要特点
- 工业级品质
- 符合RoHS标准
- CE认证
- 一年保修
产品文档
数据表
技术规格和性能数据
用户手册
安装和操作指南
