G32822002230

Dupline SeparatorType G 3282 2002Duline®FieldbusInstallationbus• Separates primary and secondary side of Dupline®, if a short circuit is detected• Uses 2 channels• Channel coding by GAP 1605• H2 Housing• For mounting on DIN-rail in accordance with EN 50 022Product DescriptionOrdering KeyG 3282 2002 230The G3282 2002 is a Dupline® bus separator, which can detect short circuits on the Dupline®bus. When a short circuit is detected, it disconnects the secondary side of the Dupline® bus.The Dupline® bus separator ispartofthesmarthouseconcept. It is designed to be used in installations where one MGG is used to con- trol/monitor several apart- ments. If a short circuit appears, only the faulty part of the Dupline® bus will be disconnected from the Dupline®bus.Type: Dupline® H2 Housing Surveillance unit2 channels Voltage SupplyTypeSelectionSupply:Ordering no.230 V G 3282 2002 230Output Specifications1 outputDupline®outDupline®Load 50 mANote:The separatorworksininstallationswitha max cabel resistance on maximum 200 Ω. This is aproximately2000 meter with the use of 0.75 mm2wire.Supply SpecificationsSupply230 VACPower ConsumptionTyp. 2.5 WGeneral SpecificationsGeneral Specifications (cont.)Housing H2-housingOutput settling time /total delay< 2 sec.IndicationDupline® on short(secondary side) Red Supply ON LEDGreen Dupline® carrier LED(primary side)YellowRelay dataContact maximum switchingcurrent3AContact resistance < 100 mΩ (measuring conditions 10 mA/20mV)Max. Switching voltage250 VACContact material Silver, nickel, gold-coveredAddressingGAP1605EnvironmentDegree of protectionIP 20Pollution degree3 (IEC 60664) Operating temperature0° to +50°CStorage temperature -20° to +85°CPower supply230 VAC ± 15%Galvanic separation fromDupline® BusPower consumption 2.2 VA Dupline® Dupline® Dimensions 36 x 77 x 70Humidity (non-condensing)20 to 80% RHWeight200 gSpecifications are subject to change without notice (26.11.2008) 1Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group