| 参数 | 价值 |
|---|---|
| GTIN | 4055626959726 |
| 订单密钥 | 1101642 |
| (图纸) | Cable management is required in certain regions if the cable length exceeds 5.0 m (Switzerland) or 7.5 m (USA) (IEC 61851-1). |
| (材料) | 2x 8.8 mm Return hoses |
| 包装单元 | 1 pc |
| (方面) | IP20 (when not plugged in, the required IP24 degree of protection must be ensured by other means, e.g., by a holder, see accessories) |
| 注(图纸) | NOTE: Cable management may be required. |
| 类型(图纸) | Without panel feed-through |
| 原产地 | DE (Germany) |
| ETIM 6.0 (eCl@ss) | EC002897 |
| ETIM 7.0 (eCl@ss) | EC002897 |
| 冷却剂(材料) | 50 % water, 50 % glycol (recommended: Glysofor N) |
| 海关关税编号 | 85444290 |
| (环境条件) | 2x NTC (DC power wires inside) |
| (温度传感器) | 1050 W (Cable length: 6 m) |
| 传感器类型(电缆) | NTC |
| 产品类型(图纸) | HPC-DC charging cable with cooled vehicle connector, cooled cable |
| 布线等级(材料) | Class 6 |
| 充电模式(图示) | Mode 4 |
| 房屋材料(设计) | Plastic |
| 电缆结构(材料) | 5 x 25 mm² + 7 x 0.75 mm² |
| 最大海拔(尺寸) | 5000 m (above sea level) |
| 电缆电阻(材料) | ≤ 0.00078 Ω/m (based on a power core, at an ambient temperature of 20°C) |
| 充电标准(图纸) | CCS type 2 |
| 阻燃等级(设计) | V0 |
| 关机温度(电缆) | 90 °C |
| 导体类型(材料) | straight |
| eCl@ss 9.0(分类) | 27144705 |
| 冷却技术(图纸) | Water-glycol mixture as coolant in the vehicle connector and in the cable |
| 标签(机械性能) | 8.9 mm x 28.9 mm (customer logo on request) |
| 物料搬运区(设计) | Soft plastic |
| 材料配合面(设计) | Plastic |
| 流量(温度传感器) | 2 l/min |
| 冷却软管直径(材质) | 1x 11.5 mm Supply hose |
| 标准/法规(图纸) | IEC 62196-3-1 |
| 防护等级(尺寸) | IP54 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products) |
| 外层护套,颜色(材质) | black |
| 最小弯曲半径(材料) | 535.5 mm (15 x diameter) |
| 外层护套,材料(材料) | EVM-1 in accordance with EN 50620 |
| (冷却装置的要求) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| 电缆外径(材质) | 35.7 mm ±0.4 mm |
| 设计线(机械性能) | HPC |
| 电阻器编码(环境条件) | 1500 Ω (between PE and PP) |
| 单件重量(不含包装) | 19,360.000 g |
| 导体长度(产品定义) | 6 m |
| 接触面材料(设计) | Ag |
| 泄压阀(温度传感器) | 2.00 bar |
| 剥离长度(产品定义) | 140 mm ±10 mm |
| 制冷能力(温度传感器) | 600 W (Cable length: 3 m) |
| 流温(温度传感器) | 10 °C |
| 插入力(电性能) | < 100 N |
| 布线标准/规范(材料) | DIN EN 50620 |
| 工作压力(温度传感器) | 1.00 bar ... 2.00 bar |
| 拔出力(电气特性) | < 100 N |
| 颜色处理区域(机械性能) | black |
| 配合面颜色(机械性能) | black |
| 最大充电功率(环境条件下) | 500 kW |
| 温度监测(环境条件) | 2x NTC (replaceable, front DC contacts) |
| 环境温度(操作)(尺寸) | -30 °C ... 40 °C |
| 中国RoHS指令(冷却装置要求) | Environmentally Friendly Use Period = 10; |
| 车辆连接器深度(产品定义) | 285.20 mm |
| 车辆连接器宽度(产品定义) | 72.00 mm |
| 通信接口(环境条件) | CAN bus for reading the temperature and leakage sensor data |
| 电源触点数量(环境条件) | 3 (PE, DC+, DC-) |
| 车辆连接器高度(产品定义) | 181.20 mm |
| 信号触点数量(环境条件) | 2 (CP, PP) |
| 信号传输类型(环境条件) | Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121 |
| 最大允许压力(温度传感器) | 4.00 bar |
| 连接方式说明(环境条件) | cannot be disconnected |
| 插入/拔出循环次数(电气特性) | > 10000 |
| 环境温度(储存/运输)(尺寸) | -40 °C ... 60 °C |
| 电源触点额定电流(环境条件) | 500 A |
| 电源触点额定电压(环境条件) | 1000 V DC |
| 信号触点额定电流(环境条件) | 2 A |
| 信号触点额定电压(环境条件) | 30 V AC |
| 车辆连接器引脚分配示意图(图纸) | |
| 原理图:中央系统:冷却单元和控制器位于外部,为多个充电站供热,每个充电站都配备一个热交换器。冷却采用冷水机主动完成。(图纸) | |
| 原理图:组合充电系统 (CCS) 原理——符合标准的电动汽车充电系统,支持传统的交流充电和直流快速充电。两种车辆连接器均插入 CCS 车辆充电口。(图示) | |
| 尺寸图:确保车辆连接器放置在合适的静止位置,以保证在两次充电之间始终保持符合 IEC 61851-1 标准的 IP24 防护等级。使用车辆连接器的尺寸来确定这种静止位置。详细规格也可在下载区找到。(图纸) |
技术规格和性能数据
安装和操作指南