| 参数 | 价值 |
|---|---|
| 配件 | Load power supply voltage range |
| 重量(配件) | Approx. 200 g (including terminal cover) |
| 适应症(附件) | LED indicators |
| 报警输出(附件) | NPN open collector, one outputMax. applicable voltage: 30 VDCMax. load current: 50 mAResidual voltage: 1.5 V max.Leakage current: 0.4 mA max. |
| 姓名(订购信息) | Hole diameter |
| 100 至 240 伏交流电(配件) | 400 to 480 VAC |
| 触发输出(附件) | One voltage output for each channel, 12 VDC ±15%, max. load current: 21 mA(with built-in short-circuit protection circuit) |
| 抗冲击性(配件) | 300 m/s2three times each in six directions along three axes |
| 内存保护(配件) | EEPROM (non-volatile memory) (number of writes: 100,000) |
| 功耗(配件) | 16 VA max. |
| 直径 12.0(订购信息) | E54-CT3 |
| 认可标准(配件) | UL508 (Listing), CSA22.2 No. 14EN50178EN61000-6-4 (EN55011: 1998, A1: 1999 Class A, Group 1)EN61000-6-2: 2001 |
| 介电强度(附件) | 2,000 VAC, 50/60 Hz for 1 min between primary and secondary |
| 储存温度(配件) | -25 to 65°C (with no icing or condensation) |
| 防护等级(配件) | IP20 |
| 电源电压(附件) | 100 to 240 VAC (50/60 Hz) |
| 尺寸(高×宽×深)(配件) | 76×45×111 |
| 抗振性能(附件) | Vibration frequency: 10 to 55 Hz, acceleration: 50 m/s2in X, Y, and Z directions |
| 绝缘电阻(附件) | 100 MΩ min. (at 500 VDC) between primary and secondary |
| 工作电压范围(附件) | 85 to 264 VAC |
| 安装环境(附件) | Overvoltage category III, pollution degree 2 (according to IEC 60664-1) |
| 电流互感器输入(附件) | Single-phase AC, 0 to 50 A (primary current of CT) |
| 负载电源电压(附件) | 100 to 240 VAC |
| 环境工作湿度(附件) | 25 to 85% |
| 操纵变量输入(附件) | 0.0 to 100.0% (via RS-485 communications) |
| 当前指示精度(附件) | ±3 A (for models with heater burnout detection) |
| 环境工作温度(附件) | -10 to 55°C (with no icing or condensation) |
| 负载电源电压范围(附件) | 75 to 264 VAC |
| 电流互感器(CT)(订购信息) | 5.8 dia. |
| 8(用于更智能地使用固态继电器的多通道功率控制器) | Not supported |
| 名称(用于更智能地使用固态继电器的多通道功率控制器) | Number of control channels |
| 400 至 480 VAC(多通道电源控制器,实现更智能的 SSR 使用) | G3ZA-8A403-FLK-UTU |
| 多通道功率控制器(用于更智能地使用固态继电器的多通道功率控制器) | 4 |
技术规格和性能数据
安装和操作指南