| 参数 | 价值 |
|---|---|
| Fiber amplifierconnector | |
| 物品 | Functions |
| 形状 | Type |
| 函数 | Power tuning |
| 预接线 | AND/OR output |
| NPN 输出 | PNP output |
| I/O 设置 | Output setting (select from channel 2 output, AND, OR, leading edge sync, falling edge sync, or differential output) |
| 响应时间 | Super-high-speed mode |
| 标准模式 | 1 ms for operation and reset respectively |
| 定时器功能 | Select from OFF-delay, ON-delay, or one-shot timer.1 ms to 5 s (1 to 20 ms set in 1-ms increments, 20 to 200 ms set in 10-ms increments,200 ms to 1 s set in 100-ms increments, and 1 to 5 s set in 1 s-increments) |
| 数字显示屏 | Select from the following: Incident level for channel 1 + incident level for channel 2, Incident level + threshold, incident level percentage + threshold, incident light peak level + no incident light bottom level, minimum incident light peak level + maximum no incident light bottom level, long bar display, incident level + peak hold, incident level + channel |
| 保护电路 | Power supply reverse polarity protection, output short-circuit protection, mutual interference prevention |
| 灵敏度设置 | Teaching and digital up/down keys |
| 保护程度 | IEC 60529 IP50 (with protective cover attached) |
| 高分辨率模式 | 4 ms for operation and reset respectively |
| 电源电压 | 12 to 24 VDC±10%, ripple (p-p) 10% max. |
| 光纤放大器连接器1 | AND/OR output |
| 光源(波长) | Red LED (650 nm) |
| 30厘米PVC电缆,带M8插头连接器(4针) | E3X-CN21-M3J-2 0.3M |
技术规格和性能数据
安装和操作指南