| 参数 | 价值 |
|---|---|
| Freewheeling diode; Freewheeling diode | |
| 颜色 | green (RAL 6021) |
| 深度 | 56 mm |
| 宽度 | 6.2 mm |
| 高度 | 80 mm |
| 绝缘 | Safe isolation: Control side / contact side |
| 应用 | Universal |
| 产品类型 | Relay Module |
| 螺纹 | M3 |
| 组装说明 | in rows with zero spacing |
| 安装类型 | DIN rail mounting |
| 操作模式 | 100% operating factor |
| 产品系列 | DEK |
| 文章修订 | 11 |
| 联系材料 | AgSnO |
| 驱动(极性) | polarized |
| 污染程度 | 2 |
| 剥皮长度 | 8 mm |
| 连接方式 | Screw connection |
| 安装位置 | any |
| 拧紧扭矩 | 0.5 Nm |
| 驱动和功能 | monostable |
| 保护电路 | Reverse polarity protection; Polarity protection diode |
| 交换容量 | 2 A (at 24 V, DC13) |
| 输入电压范围 | 19.2 V AC/DC ... 26.4 V AC/DC (20 °C) |
| 申请须知 | Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavorable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place. |
| 额定浪涌电压 | 6 kV |
| 过电压类别 | III |
| 典型释放时间 | 5 ms |
| 标准/法规 | IEC 60947-5-1 |
| 典型响应时间 | 8 ms |
| 触点开关类型 | 1 changeover contact |
| 最大浪涌电流 | 10 A (4 s) |
| 最小开关电流 | 10 mA |
| 开关触点类型 | Single contact |
| 机械使用寿命 | approx. 107cycles |
| 标称输入电压 UN | 24 V DC |
| 额定绝缘电压 | 250 V |
| 最大开关电压 | 250 V AC/DC |
| 最小开关电压 | 12 V AC/DC |
| 工作电压显示 | Yellow LED |
| 导体横截面 AWG | 24 ... 14 |
| 限制连续电流 | 6 A |
| 联合国典型输入电流 | 9 mA |
| 上次数据管理日期 | 02.05.2024 |
| 导体横截面刚性 | 0.2 mm² ... 2.5 mm² |
| 测试电压(绕组/触点) | 4 kV AC (50 Hz, 1 min., winding/contact) |
| 环境温度(运行) | -20 °C ... 50 °C |
| 导体横截面可弯曲 | 0.2 mm² ... 2.5 mm² |
| 分断能力(欧姆负载)最大值 | 140 W (at 24 V DC) |
| 环境温度(储存/运输) | -20 °C ... 70 °C |
| 额定工况下的最大功率耗散 | 0.22 W |
技术规格和性能数据
安装和操作指南