| 参数 | 价值 |
|---|---|
| for installation in electric vehicles (EVs) | |
| 深度 | 117.65 mm |
| 宽度 | 117.65 mm |
| 高度 | 4000 m (above sea level) |
| 数字 | 3 (PE, DC+, DC-) |
| 一般的 | For DC contacts, a cap is included in the scope of delivery. |
| 电缆类型 | Individual Drivers |
| 技术 | Combined Charging System |
| 插电循环 | > 10000 |
| 传感器类型 | Pt 1000 |
| 应用 | for direct current (DC) charging |
| 电缆长度 | 3 m |
| 编纂 | 4.7 kΩ (between PE and PP) |
| 产品类型 | Vehicle Entry |
| 充电模式 | Mode 4 |
| 固定螺丝 | M6 |
| 额定电流 | 200 A DC |
| 充电功率 | 200 kW |
| 产品系列 | CHARX connect universal |
| 索结构 | 2 x 70 mm² |
| 颜色(外壳) | Black (9005) |
| 碰撞检测 | existent |
| 插入力 | < 100 N |
| 线路电阻 | ≤ 0.259 Ω/km |
| 标称电压 | 1000 V DC |
| 连接点 | 2 sensors on DC contacts |
| 充电电流 | 200 A |
| 分离力 | < 100 N |
| 安装方式 | Front and rear wall mounting (Front tilt possible from 0 to 90 degrees) |
| 充电标准 | CCS Type 2 |
| 工作电压 | 24 V |
| 材料(房屋) | Plastic |
| 电缆外径 | 17.9 mm ±0.3 mm |
| 颜色(插件面板) | Black (9005) |
| 固定孔直径 | 6.70 mm (ø) |
| 单驱动单元,彩色 | OG |
| AWG导线段 | (Converted according to IEC) |
| 充电电流类型 | DC |
| 绝缘电阻 | > 200 MΩ |
| 反向电机电流 | max. 0.5 A |
| 单驱动器,材质 | Silicone |
| 温度测量 | DC contacts: 2x PT1000 (DIN EN 60751) |
| 标准/规范 | DIN EN 60751 |
| 材料(表面接触) | Silver |
| 关于杆数的说明 | 4 poles |
| 建议适应时间 | 600 ms |
| 信号传输类型 | Pulse amplitude modulation with Powerline communication modulated according to ISO/IEC 15118 / DIN SPEC 70121 |
| 环境温度(服务) | -30 °C ... 50 °C |
| 连接周期寿命 | > 10000 charge cycles |
| 典型锁定电机电流 | 0.05 A |
| 紧急机械解锁 | existent |
| 关于连接类型的说明 | Crimped, non-detachable connection |
| 锁定执行器的位置 | To the right |
| 锁定电流下的最大停留时间 | 1 sec |
| 防护指数(车辆负载输入) | IP55 (plugged in, the protection rating in working and plugged in can only be guaranteed if both connection elements are original Phoenix Contact products or equivalent standard products) |
| 阻塞检测的最大电压 | 30 V |
| 环境温度(储存/运输) | -40 °C ... 85 °C |
| 供货范围内包含螺丝。 | none |
| 电机可能的供电电压范围 | 22 V ... 26 V |
| 入境或出境旅程后的暂停时间 | 3 s |
技术规格和性能数据
安装和操作指南