服务时间:周一至周五 9:00-18:00
CHARX T1HBI12-DC250-8,0M1 - CHARX T1HBI12-DC250-8,0M1 1360760 PHOENIX CONTACT CHARX connect universal, Vehicle charging input, for direc..
现货 热销产品

CHARX T1HBI12-DC250-8,0M1

CHARX T1HBI12-DC250-8,0M1 1360760 PHOENIX CONTACT CHARX connect universal, Vehicle charging input, for direc..

$1,179.15 美元
库存 53 件
主要规格
: for installation in electric vehicles (EV)
深度: 117.6 mm
宽度: 117.6 mm
编码: 2.7 kΩ (between PE and CS)
供应商信息
产品:0
通常在 2-3 个工作日内发货
质量保证
快速发货
技术支援

技术规格

参数 价值
for installation in electric vehicles (EV)
深度 117.6 mm
宽度 117.6 mm
编码 2.7 kΩ (between PE and CS)
高度 4000 m (above sea level)
数字 5 (L1, N, PE, DC+, DC-)
一般的 A protective cap is supplied as standard for the DC contacts.
电缆类型 Single wires
技术 Combined Charging System
应用 for charging with direct current (DC)
传感器类型 Pt 1000
电缆长度 8 m
产品类型 Vehicle charging inlet
充电模式 Mode 4
固定螺丝 M6
安装类型 Front and rear mounting (0 to 90 degree frontal inclination possible)
额定电流 250 A DC
额定电压 1000 V DC
充电功率 250 kW
产品系列 CHARX connect universal
索结构 2 x 95 mm²
颜色(外壳) black (9005)
插入力 < 100 N
连接点 2 sensors for the DC contacts
电缆电阻 ≤ 0.196 Ω/km
充电电流 250 A
锁定识别 available
撤退力 < 100 N
充电标准 CCS type 1
横截面AWG (converted acc. to IEC)
工作电压 12 V
材料(房屋) Plastic
单线,彩色 OG
颜色(交配脸) black (9005)
绝缘电阻 > 200 MΩ
单根导线,材料 Silicone
标准/法规 DIN EN 60751
安装孔直径 6.70 mm (ø)
电缆外径 20.6 mm ±0.3 mm
温度测量 DC contacts: 2x PT1000 (DIN EN 60751)
注意职位数量 4-pos.
充电电流类型 DC
材料(接触面) Silver
插入/拔出周期 > 10000
建议适应时间 600 ms
信号传输类型 Pulse width modulation with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121
机械紧急释放 available
电机的反向电流 max. 1.5 A
连接方式说明 Crimp connection, cannot be disconnected
使用寿命插入周期 > 10000 load cycles
环境温度(运行) -40 °C ... 80 °C
锁定执行器的位置 top center
锁定时的典型电机电流 0.25 A
进入或离开路径后的暂停时间 3 s
反向电流下的最大停留时间 1 s
锁定检测的最大电压 12 V
环境温度(储存/运输) -40 °C ... 85 °C
电机可能的供电范围 9 V ... 16 V
供货范围内包含螺丝。 none
防护等级(车辆充电接口) IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)

产品描述

CHARX connect, Vehicle input, Locking actuator above, for charging with direct current (DC), for installation in electric vehicles (EV), Combined Charging System, CCS type 1, IEC 62196-2, IEC 62196-3,
主要特点
  • 工业级品质
  • 符合RoHS标准
  • CE认证
  • 一年保修

产品文档

数据表

技术规格和性能数据

用户手册

安装和操作指南

Top