| 参数 | 价值 |
|---|---|
| 5 V DC | |
| 类型 | block modular |
| 深度 | 54 mm |
| 宽度 | 35 mm |
| 高度 | 126.1 mm |
| 输出名称 | PWM outputs |
| 电流消耗 | max. 150 mA |
| 产品类型 | I/O component |
| 安装类型 | DIN rail mounting |
| 操作模式 | PWM, pulse generator, push-pull output |
| 产品系列 | Axioline F |
| 供电电压 | 5 V DC (via bus base module) |
| 连接名称 | Axioline F connector |
| 频率范围 | 0 Hz ... 65535 Hz |
| 文章修订 | 03 |
| 污染程度 | 2 (IEC 60664-1, EN 60664-1) |
| 保护等级 | III (IEC 61140, EN 61140, VDE 0140-1) |
| 剥皮长度 | 8 mm |
| 连接方式 | Bus base module |
| 安装位置 | any (no temperature derating) |
| 输出数量 | 2 |
| 脉冲占空比 | 0 % ... 100 % |
| 交付范围 | including bus base module and Axioline F connectors |
| 输入地址区域 | 0 Byte |
| 额定电流 IN | max. 500 mA (at 24 V DC) |
| 额定负载,灯 | max. 6 W (at nominal voltage) |
| 尺寸说明 | The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715). |
| 保护电路 | Surge protection; electronic (35 V, 0.5 s) |
| 特殊属性 | Pulse width modulation |
| 传动速度 | 100 Mbps |
| 尺寸图 | |
| 额定负载,欧姆 | max. 12 W (at 24 V DC nominal voltage) |
| 申请须知 | Only for industrial use |
| 输出地址区域 | 8 Byte |
| 防短路 | yes |
| 保护程度 | IP20 |
| 接口数量 | 2 |
| 过电压类别 | II (IEC 60664-1, EN 60664-1) |
| 供电电压范围 | 19.2 V DC ... 30 V DC including all tolerances, including ripple |
| 连接技术 | 2-conductor |
| 短路电流 | typ. 2.2 A (for approx. 1.2 µs, auto-retry after approx. 40 µs, 24 V output) |
| 标称输出电压 | 24 V (UO- 1.1 V) |
| 额定负载,感性 | max. 12 VA (at 24 V DC nominal voltage) |
| 所需参数数据 | 1 Byte |
| 气压(运行) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| 瞬态浪涌保护 | yes |
| 导体横截面 AWG | 24 ... 16 |
| 所需配置数据 | 6 Byte |
| 导体横截面刚性 | 0.2 mm² ... 1.5 mm² |
| 连接方式说明 | Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. |
| 刚性导体横截面 | 0.2 mm² ... 1.5 mm² |
| 环境温度(运行) | -25 °C ... 60 °C |
| 气压(储存/运输) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| 导体横截面可弯曲 | 0.2 mm² ... 1.5 mm² |
| 允许湿度(运行) | 5 % ... 95 % (non-condensing) |
| 柔性导体横截面 | 0.2 mm² ... 1.5 mm² |
| 环境温度(储存/运输) | -40 °C ... 85 °C |
| 允许湿度(储存/运输) | 5 % ... 95 % (non-condensing) |
| 额定工况下的最大功率耗散 | 2.05 W |
| 测试电压:24V 电源(I/O)/功能地 | 500 V AC, 50 Hz, 1 min. |
| 测试电压:本地总线 (UBus) 的 5V 电源/功能地 | 500 V AC, 50 Hz, 1 min. |
| 测试电压:本地总线(UBus)供电电压为 5V / I/O 供电电压为 24V | 500 V AC, 50 Hz, 1 min. |
技术规格和性能数据
安装和操作指南