| 参数 | 价值 |
|---|---|
| max. 1 per second (with inductive load) | |
| 类型 | block modular |
| 深度 | 54 mm |
| 宽度 | 35 mm |
| 高度 | 129.9 mm |
| 最小加载量 | 10 kΩ |
| 输出名称 | Digital outputs |
| 电流消耗 | max. 60 mA |
| 产品类型 | I/O component |
| 信号延迟 | max. 100 µs (when switched on) |
| 安装类型 | DIN rail mounting |
| 输出电压 | 24 V DC |
| 产品系列 | Axioline F |
| 供电电压 | 5 V DC (via bus base module) |
| 连接名称 | Axioline F connector |
| 文章修订 | 02 |
| 污染程度 | 2 (IEC 60664-1, EN 60664-1) |
| 保护等级 | III (IEC 61140, EN 61140, VDE 0140-1) |
| 剥皮长度 | 8 mm |
| 连接方式 | Bus base module |
| 安装位置 | any (no temperature derating) |
| 输出数量 | 16 |
| 交付范围 | including bus base module and Axioline F connectors |
| 输入地址区域 | 0 Byte |
| 额定负载,灯 | max. 12 W (at nominal voltage) |
| 尺寸说明 | The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715). |
| 保护电路 | Short-circuit protection, overload protection of the outputs; electronic |
| 传动速度 | 100 Mbps |
| 尺寸图 | |
| 额定负载,欧姆 | max. 12 W (48 Ω, with nominal voltage) |
| 申请须知 | Only for industrial use |
| 输出地址区域 | 2 Byte |
| 开关频率 | max. 10000 per second (with at least 50 mA load current) |
| 保护程度 | IP20 |
| 接口数量 | 2 |
| 过电压类别 | II (IEC 60664-1, EN 60664-1) |
| 供电电压范围 | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| 连接技术 | 2-conductor |
| 过电流关断 | as of 0.7 A |
| 过载行为 | Shutdown with automatic restart |
| 标称输出电压 | 24 V DC |
| 额定负载,感性 | max. 12 VA (1.2 H, 48 Ω, with nominal voltage) |
| 所需参数数据 | 1 Byte |
| 气压(运行) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| 导体横截面 AWG | 24 ... 16 |
| 所需配置数据 | 6 Byte |
| 导体横截面刚性 | 0.2 mm² ... 1.5 mm² |
| 连接方式说明 | Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. |
| 刚性导体横截面 | 0.2 mm² ... 1.5 mm² |
| 环境温度(运行) | -25 °C ... 60 °C |
| 气压(储存/运输) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| 电感过载时的行为 | Output can be destroyed |
| 导体横截面可弯曲 | 0.2 mm² ... 1.5 mm² |
| 关闭时的输出电流 | max. 300 µA |
| 关闭时的输出电压 | max. 1 V |
| 允许湿度(运行) | 5 % ... 95 % (non-condensing) |
| 柔性导体横截面 | 0.2 mm² ... 1.5 mm² |
| 每个模块的最大输出电流 | 8 A (provide external protection) |
| 环境温度(储存/运输) | -40 °C ... 85 °C |
| 允许湿度(储存/运输) | 5 % ... 95 % (non-condensing) |
| 对短脉冲的反向电压电阻 | limited protection up to 0.5 A for 1 s |
| 额定工况下的最大功率耗散 | 1.6 W |
| 测试电压:24V 电源(I/O)/功能地 | 500 V AC, 50 Hz, 1 min. |
| 限制电路中断时感应电压 | -32.8 V ... -15 V |
| 接地连接时,关闭时输出电流中断 | < 1 mA |
| 测试电压:本地总线 (UBus) 的 5V 电源/功能地 | 500 V AC, 50 Hz, 1 min. |
| 测试电压:本地总线(UBus)供电电压为 5V / I/O 供电电压为 24V | 500 V AC, 50 Hz, 1 min. |
技术规格和性能数据
安装和操作指南