| 参数 | 价值 |
|---|---|
| GTIN | 4046356763608 |
| 订单密钥 | 2701508 |
| (供应) | max. 2 A (at UA(IO-Link B ports, pin 2 and pin 5)) |
| 产品目录页 | Page 203 (C-6-2017) |
| 深度(注) | 38 mm |
| 包装单元 | 1 pc |
| 宽度(注) | 60 mm |
| 身高(注) | 185 mm |
| (IO-Link 输入) | Short-circuit protection |
| 原产地 | DE (Germany) |
| (数字输出) | 24 V supply (actuator supply)/FE 500 V AC 50 Hz 1 min. |
| 海关关税编号 | 85176200 |
| 职称(通用) | PROFIBUS DP |
| (电气隔离) | Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g |
| 指定(接口) | PROFIBUS DP |
| 钻孔间距(注) | 198.5 mm |
| 频道数量(总览) | 2 |
| 尺寸说明(注) | The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate). |
| 尺寸图(注) | |
| 端口类型(数字输入) | Class A |
| 连接方式(通用) | M12 fast connection technology |
| 设备类型(接口) | PROFIBUS slave |
| 保护类型(供应) | Overload protection |
| (标准和法规) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| 传动速度(一般) | 9.6 kbps ... 12 Mbps (Automatic baud rate detection) |
| 职位数量(一般) | 5 |
| 信号延迟(IO-Link 输入) | max. 150 µs (when switched on) |
| (IO-Link端口的供应) | Short-circuit protection for the sensor supply |
| 测试部分(数字输出) | 24 V supply (communications power and sensor supply, IO-Link ports)/bus connection 500 V AC 50 Hz 1 min. |
| 传输物理学(总论) | PROFIBUS-DP-compliant copper cable |
| 净重(常温常压) | 710 g |
| 切换速率(IO-Link 输入) | 1 per second, maximum (at nominal inductive load) |
| 端口数量(数字输入) | 4 |
| 地址区域分配(常规) | 1 ... 126, adjustable |
| 防护等级(尺寸) | IP65/IP67 |
| 允许的电缆长度(供货) | < 20 m |
| 连接方式(数字输入) | M12 fast connection technology |
| 连接方式(IO-Link 输入) | M12 connector, X01 ... X04 have double occupancy |
| 安装类型(环境条件) | Wall mounting or DIN rail mounting; both with mounting plate. |
| 输出数量(IO-Link 输入) | max. 8 |
| 输出描述(IO-Link 输入) | IO-Link ports in digital output (DO) mode |
| 保护类型(IO-Link 输入) | Overload protection |
| 标称负载,欧姆负载(IO-Link 输入) | 3.6 W (160 Ω, at nominal load) |
| 单件重量(不含包装) | 710.000 g |
| 气压(运行)(尺寸) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| 房屋材料(环境条件) | Zinc die-cast |
| 中国RoHS(标准和法规) | Environmentally Friendly Use Period = 25; |
| 连接技术(数字输入) | 3-wire |
| 连接技术(IO-Link 输入) | 3-wire |
| 指定连接点(通用) | Copper cable |
| 系统特定协议(接口) | PROFIBUS protocols DP V1 |
| 过载时的行为(IO-Link 输入) | Shutdown with automatic restart |
| 机械测试(电气隔离) | Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g |
| 标称输出电压(IO-Link 输入) | 24 V DC |
| I/O 电源的标称电压(电源) | 24 V DC |
| 连接方式说明(一般) | B-coded |
| 防护等级(电气隔离) | III, IEC 61140, EN 61140, VDE 0140-1 |
| 输入名称(IO-Link端口的供电) | Digital inputs at pin 2 for type A ports |
| 标称负载,感性(IO-Link 输入) | 3.6 VA (0.8 H, 160 Ω, at nominal load) |
| 环境温度(操作)(尺寸) | -25 °C ... 60 °C |
| 气压(储存/运输)(尺寸) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| 输入频率(IO-Link端口的供电) | 0.5 kHz |
| 允许湿度(运行)(尺寸) | 5 % ... 95 % |
| 使用限制(关键商业数据) | 1 |
| 标识(母线耦合器的系统限制) | Actuators (UA) |
| 输入数量(IO-Link端口供应) | max. 8 (EN 61131-2 type 1) |
| 连接方式(IO-Link端口的供电) | M12 connector, X01 ... X04 have double occupancy |
| 输入滤波时间(IO-Link端口供电) | < 1000 µs |
| 每个 IO-Link 端口的标称电流(电源) | max. 150 mA (at C/Q (pin 4), maximum of 1.6 A over all 8 IO-Link C/Q and L+ cables) |
| 保护类型(IO-Link端口供电) | Overload protection |
| 关闭时的输出电流(IO-Link 输入) | max. 300 µA |
| 关闭时的输出电压(IO-Link 输入) | max. 1 V |
| 供电电压(母线耦合器系统限制) | 24 V DC |
| 每个设备的最大输出电流(IO-Link 输入) | 1.2 A |
| 总传感器电流(IO-Link端口供电) | max. 1.6 A (from L+/L-) |
| 连接技术(IO-Link端口的供应) | 3-wire |
| 每通道最大输出电流(IO-Link 输入) | 150 mA |
| 标称输入电流(IO-Link端口供电) | typ. 3 mA |
| 环境温度(储存/运输)(尺寸) | -25 °C ... 85 °C |
| 连接方式(母线耦合器的系统限制) | M12 connector (T-coded) |
| 允许湿度(储存/运输)(尺寸) | 5 % ... 95 % |
| 当前功耗(母线耦合器系统限制) | typ. 30 mA ±15 % (at 24 V DC) |
| 输入描述(IO-Link端口供电) | IO-Link ports in digital input (DI) mode |
| 位置数量(总线耦合器系统限制) | 4 |
| 标称输入电压 UIN(IO-Link 端口的供电) | 24 V DC |
| 每个通道的传感器电流(IO-Link 端口的供电) | max. 200 mA (from L+/L-) |
| UIN 处的标称输入电流(IO-Link 端口的供电) | typ. 3 mA |
| 输入电压范围“0”信号(IO-Link端口供电) | -0.3 V DC ... 5 V DC |
| 输入电压范围“1”信号(IO-Link端口供电) | 15 V DC ... 30 V DC |
| 额定供电电压范围(母线耦合器系统限制) | 18 V DC ... 31.2 V DC (including all tolerances, including ripple) |
| 限制电路中断时感应电压(IO-Link 输入) | -15 V DC |
技术规格和性能数据
安装和操作指南