| 参数 | 价值 |
|---|---|
| GTIN | 4046356762854 |
| 笔记 | Made to Order (non-returnable) |
| 订单密钥 | 2701491 |
| (供应) | Short-circuit protection for the sensor supply |
| 产品目录页 | Page 195 (C-6-2017) |
| 深度(注) | 38 mm |
| 包装单元 | 1 pc |
| 宽度(注) | 60 mm |
| (接口) | DHCP |
| 身高(注) | 185 mm |
| (数字输入) | Short-circuit protection |
| 原产地 | DE (Germany) |
| (数字输出) | 24 V supply (actuator supply)/FE 500 V AC 50 Hz 1 min. |
| 输入名称(供应) | Digital inputs at pin 2 for type A ports |
| 海关关税编号 | 85176200 |
| 职称(通用) | EtherNet/IP™ |
| (电气隔离) | Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g |
| 指定(接口) | EtherNet/IP™ |
| 输入频率(电源) | 0.5 kHz |
| 钻孔间距(注) | 198.5 mm |
| 频道数量(总览) | 2 |
| 尺寸说明(注) | The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate). |
| 投入品数量(供应) | max. 8 (EN 61131-2 type 1) |
| 连接方式(供电) | M12 connector, X01 ... X04 have double occupancy |
| 尺寸图(注) | |
| 输入滤波时间(供应) | < 1000 µs |
| 规范(接口) | CIP Edition 3.11EIP adaptation of CIP 1.12 |
| 连接方式(通用) | M12 fast connection technology |
| 设备类型(接口) | EtherNet/IP™ slave |
| 保护类型(供应) | Overload protection |
| (标准和法规) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| 传动速度(一般) | 10/100 Mbps (with auto negotiation) |
| 职位数量(一般) | 4 |
| 信号延迟(数字输入) | max. 150 µs (when switched on) |
| 总传感器电流(电源) | max. 1.6 A (from L+/L-) |
| 连接技术(供应) | 3-wire |
| 额定输入电流(电源) | typ. 3 mA |
| 测试部分(数字输出) | 24 V supply (communications power and sensor supply, IO-Link ports)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min. |
| 净重(常温常压) | 721 g |
| 切换速率(数字输入) | 1 per second, maximum (at nominal inductive load) |
| 支持的协议(接口) | SNMP v1 |
| 防护等级(尺寸) | IP65/IP67 |
| 输入(供应)描述 | IO-Link ports in digital input (DI) mode |
| 连接方式(数字输入) | M12 connector, X01 ... X04 have double occupancy |
| 安装类型(环境条件) | Wall mounting or DIN rail mounting; both with mounting plate. |
| 标称输入电压 UIN(电源) | 24 V DC |
| 输出数量(数字输入) | max. 8 |
| 输出说明(数字输入) | IO-Link ports in digital output (DO) mode |
| 每通道传感器电流(电源) | max. 200 mA (from L+/L-) |
| 保护类型(数字输入) | Overload protection |
| 标称负载,欧姆负载(数字输入) | 3.6 W (160 Ω, at nominal load) |
| 单件重量(不含包装) | 721.000 g |
| 气压(运行)(尺寸) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| 房屋材料(环境条件) | Zinc die-cast |
| UIN(电源)处的标称输入电流 | typ. 3 mA |
| 中国RoHS(标准和法规) | Environmentally Friendly Use Period = 25; |
| 连接技术(数字输入) | 3-wire |
| 指定连接点(通用) | Copper cable |
| 系统特定协议(接口) | EtherNet/IP™ protocols ACD |
| 过载时的行为(数字输入) | Shutdown with automatic restart |
| 输入电压范围“0”信号(电源) | -0.3 V DC ... 5 V DC |
| 输入电压范围“1”信号(电源) | 15 V DC ... 30 V DC |
| 机械测试(电气隔离) | Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g |
| 标称输出电压(数字输入) | 24 V DC |
| 连接方式说明(一般) | D-coded |
| 防护等级(电气隔离) | III, IEC 61140, EN 61140, VDE 0140-1 |
| 额定负载,感性(数字输入) | 3.6 VA (0.8 H, 160 Ω, at nominal load) |
| 环境温度(操作)(尺寸) | -25 °C ... 60 °C |
| 气压(储存/运输)(尺寸) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| 允许湿度(运行)(尺寸) | 5 % ... 95 % |
| 使用限制(关键商业数据) | 1 |
| 标识(母线耦合器的系统限制) | Actuators (UA) |
| 关闭时的输出电流(数字输入) | max. 300 µA |
| 关闭时的输出电压(数字输入) | max. 1 V |
| 供电电压(母线耦合器系统限制) | 24 V DC |
| 每个设备的最大输出电流(数字输入) | 1.2 A |
| 每通道最大输出电流(数字输入) | 150 mA |
| 环境温度(储存/运输)(尺寸) | -25 °C ... 85 °C |
| 连接方式(母线耦合器的系统限制) | M12 connector (T-coded) |
| 允许湿度(储存/运输)(尺寸) | 5 % ... 95 % |
| 当前功耗(母线耦合器系统限制) | typ. 28 mA ±15 % (at 24 V DC) |
| 位置数量(总线耦合器系统限制) | 4 |
| 额定供电电压范围(母线耦合器系统限制) | 18 V DC ... 31.2 V DC (including all tolerances, including ripple) |
| 电路中断时感应电压的限制(数字输入) | -15 V DC |
技术规格和性能数据
安装和操作指南