| 参数 | 价值 |
|---|---|
| PL | X0, X1, X2, X3 up to e, X7 (PIN 3) up to d |
| 物料需求计划 | yes |
| PFH | IEC 62061: 4.8E-9 1/h; IEC 61508: 7.8E-10 1/h |
| 西门子 | X0, X1, X2, X3 up to 3, X7 (PIN 3) up to 2 |
| 类型 | for 3-wire sensors or mechanical switches, PNP, IO-Link Devices |
| PIN 2 | Input/Output (port X4, X5); Input (port X6) |
| 引脚 4 | Input/Output (port X4, X5); Input (port X6, X7) |
| 硅酸盐 | up to 3 |
| IO-Link | 2× Master |
| 类别 | X0, X1, X2, X3 up to 4, X7 (PIN 3) up to 3 |
| 现场总线 | Ethernet 10/100 Mbit/s; Push Pull RJ45 Data connector |
| I/O端口 | M12, 5-pole, A-coded |
| 解决 | DCP |
| 港口级 | 1× Class A; 1× Class B (galvanically separated) |
| 保护 | IP67 |
| 服务寿命 | 20 years |
| 共享设备 | yes, for 2 controls |
| 规格 | IO-Link Master V1.1.2 |
| 安装方法 | 2-hole screw mounting |
| 操作模式 | COM1; COM2; COM3 (automatic) |
| 执行器警告 | per channel via LED and BUS |
| 美国传感器供应商 | 24 V DC (EN 61131-2), max. 700 mA (M12 female), short-circuit and overload protected |
| 温度范围 | -20...+60 °C (storage temperature -40...+85 °C) |
| 执行器供电 UA | 24 V DC (EN 61131-2), max. 8 A |
| 通过总线进行诊断 | per module and channel |
| 通过 LED 进行诊断 | per module and channel |
| 尺寸(高×宽×深) | 102×63×225 mm |
| 传递参数 | 32 Byte (In) 32 Byte (Out) per IO-Link port |
| 通信状态 | via LED |
| 交联检测 | Sensor/Actuator |
| 断线检测 | yes |
| PROFINET Netload 类 | III |
| 监测 - 无电压 | yes |
| 监测 - 欠压 | yes |
| 短路和过载 | yes |
| 每个输出端的开关电流 | max. 2 A (short-circuit and overload protected) |
| 传感器系统/执行器供电 | Push Pull Power connector, max. 16 A |
| 制造商产品货号 | 5551001 |
技术规格和性能数据
安装和操作指南